Circular saw blade 14 Degrees East DT1182 254×30 mm, 60 teeth, +5° bevel angle

14 Degrees East DT1182 is a 254×30 mm circular saw blade with 60 teeth and a +5° bevel angle designed for precision crosscutting and fine finish work in wood and wood-based panels. The blade has tungsten carbide-tipped teeth for wear resistance and consistent edge life, and it fits saws with a 30 mm bore. It is intended for workshop and professional carpentry applications where smooth, accurate cuts and minimal tear-out are required.

Advantages

The 60-tooth configuration and fine tooth geometry deliver clean crosscuts and reduced splintering on solid wood and laminated panels. Tungsten carbide tips improve durability and maintain sharpness over extended use. The modest positive bevel angle helps produce controlled cutting action and a cleaner cut face, while the 30 mm bore ensures compatibility with common saw arbors. The blade balance and tooth layout are optimized to minimize vibration for smoother operation.

Suitable for

• Crosscutting solid wood and soft hardwoods
• Fine finish cuts in MDF, plywood and laminated boards
• Workshop table saws, mitre saws and panel saws with 30 mm bore
• Carpentry and joinery tasks requiring low tear-out and precise end results

Key specifications

• Diameter: 254 mm
• Bore (arbor) diameter: 30 mm
• Number of teeth: 60
• Tooth material: tungsten carbide tips
• Bevel angle: +5°
• Primary application: crosscutting and fine finish in wood and wood-based panels

How to use

Install the blade on a compatible saw with a 30 mm arbor following the machine manufacturer's instructions. Ensure the saw is disconnected from power before fitting or removing the blade. Verify correct blade rotation and secure the blade flange and nut to the recommended torque. Use appropriate feed rates and fence support for the workpiece, and make trial cuts on scrap material to confirm settings. Maintain steady feed and avoid forcing the blade to prevent overheating or premature wear.

Usage recommendations

Wear appropriate personal protective equipment, including eye and hearing protection. For best results on laminated or veneered boards, score edges before the full cut or use an auxiliary backing support to reduce tear-out. Periodically inspect the carbide tips for wear and have the blade professionally sharpened when cutting quality diminishes.