Drill bit 14 Degrees East DT6675-XJ, length 100 mm, single piece

Drill bit 14 Degrees East DT6675-XJ, length 100 mm, single piece is a masonry and general-purpose drill bit designed for applications that require a 100 mm drilling depth. The single-piece supply makes it suitable for occasional replacement or use as a spare when working with hand drills and drill drivers. The bit features an anti-slip shank and is indicated for use in masonry, brick, stone, tiles and light concrete. Typical uses include drilling clearance holes for anchors, plastic plugs, fixings or pipework.

Advantages

The DT6675-XJ is manufactured with a hardened steel body and core reinforcement to provide improved tensile strength and resistance to breakage during heavy-duty tasks. A machined spiral flute of large volume supports efficient dust extraction and faster drilling progress. The tip assembly uses a hard metal with low-stress, high-temperature copper soldering designed to increase durability and reduce the risk of tip failure under load. The anti-slip shank improves grip in the drill chuck and helps maintain consistent rotational drive.

Suitable for

• Drilling anchor and plastic plug holes in masonry and brick
• Creating clearance holes for fixings and pipework in stone or light concrete
• General-purpose drilling in tiles and similar building materials where a 100 mm cutting length is required

Key specifications

• Cutting length: 100 mm
• Supply: single piece
• Shank type: anti-slip shank for improved chuck grip
• Intended materials: masonry, brick, stone, tiles, light concrete
• Construction: hardened steel body with core reinforcement and machined spiral flute
• Tip: hard metal soldered with low-stress high-temperature copper alloy

How to use

Install the drill bit into a compatible hand drill or drill driver, ensuring the anti-slip shank seats securely in the chuck. Mark the drilling position and start at low speed to establish the hole, then increase speed and apply steady pressure appropriate to the material. Use intermittent withdrawal to clear dust and reduce heat buildup, particularly when drilling deep 100 mm holes in masonry or concrete. Secure workpieces and use appropriate personal protective equipment, such as eye protection and dust masks, when drilling.

Usage recommendations

For best performance, use the DT6675-XJ with a drill capable of delivering steady speed and torque suitable for masonry work, and select drill settings and protective measures according to the substrate. When drilling tiles, begin with a pilot point and moderate speed to avoid chipping. Replace the bit if tip wear or reduced drilling progress is observed.