Masking tape 3M Scotch 244 Gold, 50 mm x 50 m, acrylic adhesive

3M Scotch 244 Gold masking tape is a 50 mm wide, 50 m long general-purpose tape with an acrylic adhesive formulated for clean paint lines and surface protection. The tape balances adhesion and removability to perform reliably on painted surfaces, metal, glass and many common substrates used in painting, DIY and light industrial applications. Its paper backing conforms to moderate curves and edges while allowing controlled tear and application.

Advantages

The acrylic adhesive offers stable tack across a range of temperatures and resists residue on most surfaces after short- to medium-term application. The 50 mm width provides a practical balance between coverage and precision, enabling both long runs and detailed edge masking. The backing material gives adequate conformability for curved profiles and simple shapes, while the tape is designed for easy hand tear and smooth unwinding from the roll.

Suitable for

• Interior and exterior painting tasks requiring straight, clean paint lines
• DIY and home renovation masking of trims, windows and door frames
• Automotive refinishing and touch-up masking for body panels and trims
• Light industrial or maintenance masking where temporary protection is needed

Key specifications

• Width: 50 mm
• Length: 50 m
• Adhesive type: acrylic
• Backing: crepe paper (conformable)
• Typical performance: clean removal after short- to medium-term application on most common substrates
• Application temperature range: suitable for typical indoor and moderate outdoor conditions

How to use

Ensure the surface is clean, dry and free of dust or grease before applying the tape. Unwind the tape and press it firmly along the edge or area to be masked, smoothing out any air pockets or wrinkles. For curved surfaces, apply the tape in sections, conforming the backing to the profile. After painting or protection period, remove the tape by pulling it back on itself at a low angle for a controlled release. For best results, remove within the manufacturer’s recommended time window for temporary masking to avoid adhesive transfer.

Usage recommendations

Use on clean, stable surfaces for optimal removal. Avoid prolonged exposure to direct sunlight or extreme heat when applied for long-term masking. Test on an inconspicuous area if surface sensitivity is unknown.