Sediment filter 4Swiss cartridge No.1 5 Micron 10 inch

Sediment filter 4Swiss cartridge No.1 5 Micron 10 inch is a replacement pre-filter cartridge designed for use in standard 10" housings. It provides mechanical filtration at a nominal 5 micron rating to capture sand, rust, silt and other large particulate matter from municipal or well water supplies. The cartridge is intended to protect downstream cartridges, household appliances and plumbing from clogging and premature wear, while improving water clarity before finer filtration stages.

Advantages

The 4Swiss sediment cartridge combines a consistent 5 micron nominal filtration with a 10-inch form factor compatible with most standard housings. Its construction ensures even flow distribution and efficient particle retention across the cartridge surface. The cartridge is simple to replace, requires no special tools for installation in standard housings, and helps reduce maintenance frequency and costs for subsequent filters and equipment.

Suitable for

• Pre-filtration in household water treatment systems
• Protection of reverse osmosis and activated carbon filters
• Filtration of municipal or well water with visible particulates
• Light commercial applications such as small offices or retail sites

Key specifications

• Filtration rating: 5 micron (nominal)
• Length: 10 inches (standard cartridge size)
• Application: sediment and large particulate removal
• Compatibility: designed for standard 10" filter housings
• Material type: pleated/structured sediment media (mechanical filtration)

How to use

Shut off the water supply and relieve pressure from the filter housing before replacing the cartridge. Remove the housing according to the housing manufacturer's instructions, extract the used cartridge and insert the 4Swiss sediment cartridge into the housing with the correct orientation. Reinstall the housing, open the water supply, and check for leaks. Flush the filter briefly until the water runs clear before regular use. Follow the housing manufacturer's safety and installation guidelines throughout the procedure.

Usage recommendations

Replace the cartridge at regular intervals based on water quality and flow rate—typical replacement frequency ranges from every 3 to 6 months for household use, or sooner if pressure drop or visible clogging occurs. For best results use as the first stage in a multi-stage filtration system to prolong the life of finer filters such as activated carbon or reverse osmosis membranes.