LED strip ABILITE SMD2835 5 m, 60 LEDs/m, 4.8 W/m, 12 V

Flexible LED strip ABILITE SMD2835 5 m, 60 LEDs/m, 4.8 W/m, 12 V is a continuous light source designed for accent and decorative lighting. The strip uses SMD2835 diodes arranged at 60 LEDs per metre and is rated at 4.8 W per metre with a 12 V DC supply. Its flexible PCB allows installation on straight and gently curved surfaces; the product is intended for indoor use when mounted on a compatible surface and powered from a suitable 12 V LED driver.

Advantages

The SMD2835 LED chips provide even light distribution and relatively low power consumption per metre. A 5-metre length reduces the need for multiple connections and simplifies installation across longer runs. The 60 LEDs per metre density balances brightness and energy use, making the strip suitable for general accent lighting without excessive heat generation when installed on an appropriate aluminium profile or mounting surface.

Suitable for

• Under-cabinet kitchen lighting
• Accent lighting in living rooms and bedrooms
• Retail display shelf illumination
• Indirect cove or furniture lighting
• Backlighting for signage and panels

Key specifications

• Length: 5 metres
• LED type: SMD2835
• LED density: 60 LEDs per metre
• Power consumption: 4.8 W per metre
• Nominal supply voltage: 12 V DC
• Flexible PCB for curved and straight mounting
• Indoor use recommendation; requires compatible 12 V power supply

How to use

Measure and prepare the mounting surface, ensuring it is clean, dry and compatible with adhesive or mechanical fixing. Cut the strip only at marked cutting points and join sections using appropriate connectors or soldering methods compatible with 12 V LED strips. Connect the strip to a compatible 12 V DC LED driver sized to supply the total wattage (total length in metres × 4.8 W). If heat dissipation is a concern or for longer runs, mount the strip on an aluminium profile or heat-conductive surface to extend lifetime and maintain luminous performance.

Usage recommendations

The strip must be powered by a suitable 12 V DC LED driver with sufficient wattage and short-circuit protection. Do not operate the strip without a driver or in wet outdoor conditions unless an appropriate IP-rated version and enclosure are used. For optimal durability and heat management, install the strip on an aluminium profile or heat-dissipating mounting surface and avoid operating near high ambient temperatures.