Drill bit Abraboro SDS+ 6 mm AB00004003 for hammer drills

Abraboro SDS+ 6 mm drill bit AB00004003 is a rotary-percussion drill bit made for SDS+ compatible hammer drills. With a 6 mm diameter and a reinforced flute geometry, this bit is intended for drilling holes in concrete, masonry and similar mineral substrates where impact drilling is required. The SDS+ shank provides fast, slip-free insertion and stable engagement in hammer drill chucks that accept SDS+ fittings.

Advantages

The drill bit offers reliable percussion drilling performance with consistent hole dimensions and reduced walking at startup. Its SDS+ shank ensures quick tool changes and secure seating in compatible chucks. The flute profile facilitates efficient removal of dust and debris from drilled holes, while the 6 mm diameter gives a balance between drilling speed and hole precision for anchor bolts, dowels and cable passage.

Suitable for

• Drilling 6 mm holes in concrete and masonry
• Preparing anchor and dowel fixing points
• Creating passages for cables and conduits in mineral substrates
• General-purpose impact drilling with SDS+ hammer drills

Key specifications

• Shank type: SDS+
• Diameter: 6 mm
• Intended materials: concrete, masonry and similar mineral materials
• Drilling method: rotary-percussion (hammer drilling)
• Typical use level: professional and DIY

How to use

Select an SDS+ compatible hammer drill and set the tool to the rotary-percussion mode. Insert the bit into the chuck until it engages securely with the SDS+ locking mechanism. Mark the drilling location and, where appropriate, start at low speed to position the bit, then apply steady pressure and increase speed as needed. Withdraw the bit periodically to clear dust from the hole and avoid excessive heating. After drilling, remove debris from the hole before inserting anchors or fixing elements.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and a dust mask when drilling in concrete and masonry. For longer drilling runs or larger diameters, consider a drill with sufficient impact energy and cooling pauses to extend bit life. Replace the bit when wear affects drilling accuracy or causes excessive walking.