Drill bit Abraboro SDS+ 8 mm for concrete AB00004012

Abraboro SDS+ 8 mm drill bit for concrete AB00004012 is a rotary hammer accessory designed for drilling 8 mm diameter holes in concrete and masonry. The bit is made for use with SDS+ chucks and features a slotted SDS+ shank that provides secure retention and effective transfer of hammer impacts. Intended for creating anchor and dowel holes as well as openings for electrical conduits and piping, this drill bit supports common installation and renovation tasks in construction environments.

Advantages

The SDS+ shank ensures quick insertion and stable fixation in compatible rotary hammers, while the 8 mm diameter offers a standard size for many anchors and fasteners. The flute geometry is designed to remove dust from the hole efficiently during drilling, reducing friction and maintaining drilling speed. The bit construction balances hardness for concrete penetration with toughness to resist breakage during repeated impact use.

Suitable for

• Drilling 8 mm holes in concrete and masonry
• Preparing anchor and dowel fixing points
• Creating openings for electrical conduits and small pipes
• General renovation and construction drilling tasks requiring SDS+ compatibility

Key specifications

• Diameter: 8 mm
• Shank type: SDS+
• Application material: concrete, masonry
• Intended use: hammer drilling with rotary hammer
• Typical tasks: anchor installation, conduit routing, repair and renovation drilling

How to use

Select a rotary hammer with an SDS+ chuck and insert the Abraboro SDS+ 8 mm drill bit until it locks. Mark the drilling position, hold the tool perpendicular to the surface, and start drilling at low speed to establish the hole. Apply steady pressure and allow the hammer action to advance the bit; avoid excessive axial force that could overheat the bit. Periodically withdraw the bit to clear dust from the hole for more efficient cutting and to prolong bit life. After reaching the required depth, clean the hole before inserting anchors or conduits.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, gloves and hearing protection. For best results in reinforced concrete, check for rebar with a detector before drilling and use a suitable carbide-tipped or rebar-capable bit if required. Store the bit in a dry place and replace it when signs of wear or chipping reduce drilling performance.