Concrete SDS+ Drill Bit Abraboro 16 mm AB00004033

The Abraboro Concrete SDS+ Drill Bit 16 mm AB00004033 is a purpose-built masonry drill designed for use with SDS+ rotary hammers. It delivers consistent hole quality in concrete, brick and natural stone, enabling accurate installation of anchors, dowels and conduits. The 16 mm diameter is a common choice for medium-duty anchoring and service penetrations on construction and installation sites.

Advantages

The SDS+ shank ensures fast, secure engagement with compatible rotary hammers and reduces slipping during heavy-duty percussion drilling. The carbide-tipped cutting head provides wear resistance and sustained drilling performance in abrasive materials. The flute geometry is optimised for efficient dust and debris evacuation, which shortens drilling time and reduces clogging in deep holes.

Suitable for

• Drilling holes for anchors and mechanical fixings in concrete and masonry
• Creating service penetrations for electrical conduit and plumbing
• Preparation of holes for dowels and rebar positioning in renovation and construction
• General medium-duty drilling tasks on job sites and in maintenance work

Key specifications

• Drill type: SDS+ masonry/concrete drill
• Diameter: 16 mm
• Intended materials: concrete, brick, natural stone and masonry
• Tip: carbide cutting tip for improved wear resistance
• Shank: SDS+ compatible for rotary hammer drills
• Flute design: spiral flute for efficient dust removal

How to use

Secure the drill bit in an SDS+ rotary hammer chuck following the tool manufacturer's instructions. Mark the drilling position, apply steady axial pressure and operate the hammer in the rotary-percussion mode for best results in concrete and masonry. Start at low speed to create a pilot seat if needed, then progress with consistent pressure—avoid excessive sideways force. Periodically withdraw the bit to clear dust from the hole and preserve the carbide tip.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, hearing protection and a dust mask. Match the drill diameter to the anchor or dowel specification and allow short cooling intervals during prolonged drilling to maintain bit life. For precision anchoring, verify hole depth and clean the hole before inserting fixings.