OM3 Multimode Fiber Optic Cable ACT 80m 4x LC Connectors

OM3 Multimode Fiber Optic Cable ACT 80m 4x LC Connectors is a pre-terminated multimode 50/125 µm fiber cable with four LC connectors on each end and an 80 m length. The cable is designed for indoor and outdoor use and supports short- to medium-range high-speed data transmission. Connectors are factory-installed and each cable is individually tested with an accompanying test report, so the cable is ready to deploy without additional termination or calibration tools.

Advantages

The ACT OM3 pre-terminated cable eliminates the need for field termination, tools or test equipment because connectors are pre-set and verified. It delivers low attenuation (average 0.10 dB, maximum 0.15 dB), providing margin in optical budgets and helping to future-proof installations. The construction protects connectors and fanouts with a transparent tube on both ends, includes a drawbar eye and withstands up to 350 N of pulling force while maintaining an 18 mm protective hose diameter for easy routing through conduits.

Suitable for (tasks / use cases)

• Connecting equipment between rooms within a building
• Running fiber between different floors
• Linking two buildings on a site
• Data centers, telecom rooms and campus networks requiring OM3 multimode links

Key specifications

• Length: 80 m
• Fiber type: Multimode OM3, 50/125 µm
• Connectors: 4x LC on each end (pre-terminated)
• Typical attenuation: 0.10 dB (average), 0.15 dB (maximum)
• Construction: Indoor/outdoor rated, Dca Euroclass (CPR compliant)
• Maximum tensile: 350 N
• Protective hose diameter: 18 mm
• Brand: ACT, MPN: RL2408, EAN: 8716065351071

How to use

Route the pre-terminated ACT OM3 cable between required endpoints and secure it according to site standards. Remove only the outer protective elements as needed to access the pre-fitted LC connectors; the connectors and fanouts are already protected by transparent tubes during handling. Verify connector types and orientation before insertion into patch panels or equipment. No field polishing or connector assembly is required. Scan the QR code on the cable to access the factory test report and installation instructions.

Usage recommendations

Install within the cable's rated environment and follow pull tension limits (do not exceed 350 N). Use appropriate strain relief at termination points and ensure bend radii comply with multimode OM3 specifications. For outdoor runs, follow local building and CPR requirements. Consult the QR-linked installation documentation for detailed steps and test values.