Respirator Filter Active Gear F50 — A1B1E1K1 P3 R, set of 2

Replacement respirator filters Active Gear F50 — A1B1E1K1 P3 R, set of 2 are designed to provide multi-hazard respiratory protection when used with compatible half- or full-face mask systems. These filters combine gas and vapor adsorption layers with a high-efficiency particulate filter to reduce exposure to a range of organic vapours, inorganic gases, acid gases, ammonia and airborne particulates. The compact, user-replaceable cartridges are intended for environments where both chemical and particulate hazards are present and where easy installation and safe disposal are required.

Advantages

The Active Gear F50 filters integrate chemical adsorption media and a high-efficiency particulate layer in a single cartridge to cut down on the need for multiple attachments. Their universal connection format fits standard compatible mask systems for straightforward installation and replacement. The filters are certified to provide protection against organic vapours, inorganic gases, acid gases, ammonia and high levels of particulates, delivering combined respiratory hazard coverage in one compact unit. The set of two allows replacement of both sides at once or having a spare cartridge available.

Suitable for

• Industrial painting and stripping where organic solvent vapours are present
• Construction and renovation work with dust, plaster and cement particulates
• Maintenance tasks involving exposure to acids, alkalis or ammonia
• Laboratory and chemical handling with mixed gas and particulate hazards
• Cleaning and sanitation procedures that generate aerosols and vapours

Key specifications

• Protection classes: combined gas/vapour adsorption with high-efficiency particulate filtration rated to P3 level
• Filter combination: organic vapour, inorganic gases, acid gases, ammonia and particulate filtration
• Configuration: twin-cartridge set for bilateral installation or spare replacement
• Compatibility: designed for use with compatible half- and full-face respirator mask systems that accept standard threaded cartridges
• Installation: user-replaceable cartridges with simple twist-and-lock or bayonet type mounting depending on the mask
• Service life: dependent on contaminant concentration, humidity and breathing rate; replace when breathing becomes difficult or exposure limits are exceeded

How to use

Inspect the mask and filter connection points before installation for damage or contamination. Remove the protective seals from the filter cartridges and attach each cartridge securely to the mask following the mask manufacturer’s mounting instructions until the lock engages. Perform a user seal check or fit test to verify there are no leaks. Replace both cartridges simultaneously when performance is reduced, when breathing resistance increases, or according to workplace exposure monitoring and the mask manufacturer’s guidance. Dispose of used cartridges in accordance with local regulations for contaminated waste.

Usage recommendations

Use the Active Gear F50 filters only with compatible respirator masks and in atmospheres where oxygen concentration is adequate. Do not use these filters in environments with unknown concentrations of highly toxic gases, oxygen-deficient atmospheres or where contaminants are immediately dangerous to life or health. Store unused filters in a cool, dry place away from strong odors and direct sunlight to preserve adsorption capacity. Follow workplace safety procedures, perform regular fit checks and replace filters based on exposure conditions and manufacturer guidance.