Internal power cable ADATA 1×4-pin to 2×3-pin (select 5V or 12V) model 64010132

ADATA internal power cable model 64010132 converts a single 4-pin Molex-style power connector into two separate 3-pin connectors with a selectable output voltage of either 5V or 12V. The compact cable is intended for internal PC or device power distribution where two 3-pin peripherals need to be powered from a single 4-pin source. Its construction accommodates standard 4-pin-to-3-pin connection layouts and provides a manual voltage selection option, allowing compatibility with components that require either 5V or 12V input.

Advantages

The cable provides a simple and space-efficient way to power two 3-pin devices from one 4-pin supply, reducing the need for additional power adapters or complex rewiring. The selectable 5V/12V output increases compatibility with a range of peripherals such as fans, LED strips, and other low-power internal components that use 3-pin connectors. Its internal routing design keeps cables organized inside the chassis and helps maintain airflow and a neat build.

Suitable for

• Powering two 3-pin case fans from one 4-pin power source
• Connecting dual LED or lighting components that accept 3-pin power
• Supplying power to internal peripherals with 3-pin connectors in compact builds

Key specifications

• Input connector: single 4-pin internal power connector
• Output connectors: two 3-pin internal power connectors
• Selectable output voltage: 5 volts or 12 volts (user-selected)
• Cable type: internal PC power distribution cable
• Typical use: low-power internal peripherals such as fans and lighting

How to use

Install the cable by first selecting the required output voltage (5V or 12V) according to the voltage rating of the connected devices. Connect the single 4-pin plug to the appropriate 4-pin power header or Molex output on the power supply or adapter board. Then attach the two 3-pin connectors to the target peripherals, ensuring proper seating and correct pin orientation. Route the cable inside the case to avoid obstructing airflow and secure it with cable ties or mounting points as needed.

Usage recommendations

Verify the voltage requirement of each connected device before selecting 5V or 12V to prevent damage. Do not exceed the current rating of the 4-pin source; when powering two devices at once, confirm the combined current draw stays within safe limits of the supplying connector. For optimum cable routing and cooling, position the cable along chassis edges and avoid tight bends near connector ends.