Paste for Gas Soldering Iron AG TermoPasty GAZ DO LUTOWNICY GAZOWEJ 200 ml

AG TermoPasty GAZ DO LUTOWNICY GAZOWEJ 200 ml is a heat-conductive paste formulated for use with gas-powered soldering irons and butane lighters. The product is intended to improve the thermal contact between the heat source and the soldering tip or the workpiece, promoting even heat distribution and more consistent soldering performance during field repairs, assembly and maintenance tasks.

Advantages

The paste enhances heat transfer and reduces the time required to reach soldering temperature, helping to stabilize the tip temperature and minimize cold spots. Its formulation is suitable for repeated use and temporary surface application on metal joints and tips without requiring additional flux. The 200 ml format provides sufficient volume for multiple sessions and on-site repairs.

Suitable for

• Gas-powered soldering irons and butane lighters
• On-site repairs and field maintenance
• Electrical and electronic soldering where gas tools are used
• General metal joining and light plumbing work requiring portable heat sources

Key specifications

• Form: viscous thermal paste suitable for manual application
• Volume: 200 ml container
• Compatibility: formulated for contact with heated metal tips and workpieces used with gas soldering tools
• Function: improves thermal conductivity and heat transfer between tool and joint

How to use

Apply a thin, even layer of paste to the soldering tip or directly to the joint area before heating. Avoid excessive application; a small amount is sufficient to improve thermal contact. Ignite and operate the gas soldering iron or lighter according to the tool manufacturer’s instructions and heat until the solder flows properly. After use, wipe excess paste from the tip and workpiece with a clean cloth while warm, then allow surfaces to cool. Store the container tightly closed in a cool, dry place away from open flames and high temperatures.

Usage recommendations

For best results, use the paste sparingly and reapply only when heat transfer begins to degrade. Ensure adequate ventilation when working with gas-powered tools and follow safety guidelines for handling flammable gases and hot surfaces.