PCB contact cleaner spray AG TermoPasty KONTAKT-PCB-PLUS/400, 400 ml, electronic board cleaner

AG TermoPasty KONTAKT-PCB-PLUS/400 is a 400 ml spray cleaner formulated for maintenance and repair of printed circuit boards and electronic contacts. The product is intended to remove dirt, flux residues and light corrosion from PCB surfaces and connector contacts without mechanical abrasion. Its fast-drying solvent formulation leaves minimal residue and is suitable for routine cleaning of electronic assemblies in workshops, service centres and hobby projects.

Advantages

The cleaner provides efficient removal of flux, oils and light oxidation from circuit boards and connectors while evaporating quickly to reduce downtime. It does not require scrubbing, which lowers the risk of damaging delicate traces and components. The spray format allows targeted application to contact areas and hard-to-reach places, and the formulation is designed for electronic use to minimise residue on sensitive components.

Suitable for

• Cleaning printed circuit boards and component pads
• Removing flux residues after soldering
• Cleaning connector pins and sockets
• Maintenance of electronic equipment in service centres and workshops
• Hobby electronics and small repair projects

Key specifications

• Form: aerosol spray, 400 ml container
• Application: contact and PCB cleaning
• Effect: removes dirt, flux residues and light corrosion
• Drying: fast-evaporating solvent formulation
• Residue: minimal residue when used as directed
• Compatibility: intended for use on electronic assemblies and connectors (test on sensitive materials before use)

How to use

Before use, power off and disconnect the equipment and allow capacitors to discharge. Shake the can well and spray short bursts onto the area to be cleaned from a distance of about 10–20 cm. For localised cleaning, use controlled short sprays; for larger areas, apply evenly until contaminants are removed. Allow the solvent to evaporate completely before re-energising the equipment. If necessary, repeat application and use a lint-free cloth or brush to remove loosened residues, taking care not to damage components.

Usage recommendations

Use in a well-ventilated area and avoid inhalation and contact with skin and eyes. Test on a small inconspicuous area if plastic parts or sensitive components are present. Store the aerosol upright, away from heat sources and open flames, and follow local regulations for disposal of aerosols and solvent wastes.