Wall Fan airRoxy pRim 100S — 100 mm, 15 W, axial ventilation

The airRoxy pRim 100S wall fan is a compact axial ventilation unit with a 100 mm impeller diameter and a 15 W motor, designed for basic air extraction and circulation in small rooms. Intended for installation in walls, this model is suitable for bathrooms, toilets, storage rooms and other utility spaces where a low-power exhaust solution is required. Its compact construction allows installation in limited spaces while providing steady air movement and reduced humidity buildup.

Advantages

The fan combines a low energy consumption motor with a compact axial design to deliver effective ventilation in confined spaces. Its simple wall-mount construction permits straightforward installation and integration with standard duct openings. With a 100 mm impeller and a 15 W drive, the unit provides reliable continuous or intermittent operation for routine air extraction tasks while keeping noise levels and energy use low.

Suitable for

• Ventilation and air extraction in small bathrooms and toilets
• Supply of fresh air or removal of stale air in utility rooms and storage areas
• Supplementary ventilation for laundry rooms and kitchenettes with limited space
• Continuous or intermittent use in low-load residential and commercial spaces

Key specifications

• Impeller diameter: 100 mm
• Motor power: 15 W
• Axial fan design for direct wall installation
• Compact housing suitable for limited installation depth
• Designed for low-power extraction and improved air circulation

How to use

Install the fan into a prepared wall opening following local electrical and building regulations. Connect the fan to a suitable power supply and, if needed, to a control switch or timer for intermittent operation. Ensure the direction of airflow matches the intended extraction path and that any ducting or grille is fitted securely. For continuous operation, check that the installation allows adequate intake air to prevent negative pressure in the room.

Usage recommendations

For best results, position the fan at or near the ceiling where warm, moist air accumulates. Use a dedicated on/off switch or timer for controlled intermittent ventilation in bathrooms. Periodically inspect and clean the impeller and housing to maintain airflow and efficiency; disconnect power before maintenance.