Floor paint AKSIL AKSILBET RAL 7035 light gray, water-based, 5 L

AKSIL AKSILBET RAL 7035 light gray is a water-based floor paint supplied in a 5 L container and formulated for use on interior concrete and cement surfaces. The coating is intended to provide a protective and decorative finish for garages, warehouses, workshops and residential basements. It is suitable for brush or roller application and delivers practical resistance for indoor floor areas where moderate mechanical and chemical stress can occur.

Advantages

This water-based floor paint offers good adhesion to prepared concrete and cement substrates and dries to a durable, low-gloss finish in light gray (RAL 7035). The formulation reduces dusting of the substrate and simplifies cleaning of the floor surface. Being water-based, the product has reduced solvent odor compared with solvent-based systems and allows straightforward application with common tools such as rollers and brushes.

Suitable for

• Interior concrete and cement floors in garages
• Warehouse and workshop floors with light to moderate traffic
• Residential basements and utility rooms
• Newly laid or previously painted interior cement surfaces (properly prepared)

When it may not be suitable

This paint is formulated for interior use on concrete and cement; it is not intended for exterior exposure where UV, rain and temperature cycling occur. It may not provide adequate performance on floors subject to heavy, continuous mechanical loads, frequent forklift traffic, or strong chemical exposure without a more resistant industrial coating system. Surfaces with oil contamination, active moisture or severe damage require specialist preparation or different products.

Key specifications

• Type: water-based floor paint
• Color: light gray (RAL 7035)
• Volume: 5 liters
• Application: brush or roller
• Recommended substrates: concrete, cement
• Finish: low-gloss / protective decorative coat

How to use

Ensure the floor is clean, dry and free of loose particles, dust, grease and oil. Repair cracks and spalled areas and allow repairs to cure. For best results, mechanically prepare the surface by grinding or shot blasting where necessary and remove all dust. Stir the paint thoroughly before use. Apply with a quality roller or brush in thin, even coats; two coats are commonly recommended for uniform coverage and durability. Allow sufficient drying time between coats according to ambient temperature and humidity. Avoid foot traffic until the coating has cured to its recommended hardness.

What to consider before purchase

• Confirm the volume (5 L) matches the area to be coated and estimate coverage based on substrate porosity.
• Verify the RAL 7035 light gray color is suitable for your space and lighting conditions.
• Check that the project is interior and that the expected mechanical and chemical stresses align with a water-based floor paint.

Usage recommendations

Store and apply at temperatures recommended by the manufacturer (typically above 5–10°C). For optimal durability, apply two thin coats rather than a single thick coat, and ensure good substrate preparation and adequate drying/curing time before heavy use.