Alantec RG6 Coaxial Cable RGTec FireHardy 500m 75 Ohm Trishield B2ca LSOH 1.02/4.55/7.06

The Alantec RG6 coaxial cable RGTec FireHardy with a length of 500 meters is designed for reliable signal transmission in professional audio, video, and antenna installations. Featuring a 75 Ohm impedance and advanced trishield screening, this cable provides effective protection against electromagnetic interference, ensuring stable performance over long distances. Built with a fire-resistant B2ca LSOH jacket, it meets stringent safety requirements for indoor installations where low smoke and zero halogen properties are essential. The physical dimensions include a 1.02 mm inner conductor, a 4.55 mm dielectric, and a 7.06 mm outer sheath diameter, delivering consistent mechanical and electrical characteristics.

Advantages

The Alantec RG6 coaxial cable offers high-level signal integrity thanks to its trishield screening, which minimizes external interference in demanding environments. The inclusion of a B2ca LSOH jacket enhances safety by reducing smoke emission and preventing flame propagation in case of fire, making it compliant with strict building regulations. The generous 500-meter length supports extensive cabling runs without the need for intermediate joints, while the robust construction ensures long-term durability and stable 75 Ohm impedance performance.

Suitable for

• Professional audio and video signal distribution
• Antenna and television signal installations
• Broadband and cable television networks
• Indoor installations requiring B2ca fire safety ratings

When it may not be suitable

This cable may not be suitable for direct underground burial or outdoor installations without additional protective conduits, as its B2ca LSOH jacket is primarily designed for indoor building environments. Additionally, it might be excessive or difficult to route in small-scale residential setups where shorter cable lengths and standard flexibility are required.

Key specifications

• Cable type: RG6 coaxial cable
• Length: 500 meters
• Impedance: 75 Ohm
• Screening: Trishield
• Fire rating jacket: B2ca LSOH
• Inner conductor diameter: 1.02 mm
• Dielectric diameter: 4.55 mm
• Outer sheath diameter: 7.06 mm

How to use

To use the Alantec RG6 coaxial cable, carefully unroll the required length from the 500-meter spool, avoiding sharp bends or kinks that could damage the internal conductor or dielectric. Strip the outer sheath, foil, and braid layers using appropriate coaxial stripping tools to prepare the ends for connector attachment. Install compatible 75 Ohm connectors securely to ensure proper electrical contact and minimal signal loss. Route the cable along designated pathways, securing it with appropriate fixings while respecting the minimum bending radius specified for coaxial cables.

What to consider before purchase

• Verify the required cable length to ensure the 500-meter spool meets project demands
• Check local building regulations regarding fire safety ratings such as B2ca LSOH
• Ensure compatibility with standard 75 Ohm connectors and termination tools
• Assess the installation environment to confirm whether indoor fire-resistant routing is necessary

Usage recommendations

Always adhere to the manufacturer guidelines regarding minimum bending radius and pulling tension during installation. Store the remaining spool in a dry indoor environment away from direct sunlight and extreme temperatures to preserve the integrity of the materials.