Power cable Alcasa P1405-S050 — 5 m, C14 coupler to C5 coupler, H05VV-F3G, 250 V

Alcasa P1405-S050 is a 5 m mains power cable with an IEC C14 coupler at one end and an IEC C5 coupler at the other, designed to supply equipment that accepts a C5 inlet from a C14 mains source. The cable is manufactured with H05VV-F 3-core PVC-insulated conductors and a conductor cross-section of 1.00 mm², rated for 250 V operation. Its 5-m length provides extended reach for connecting laptop power supplies, small appliances and compact IT devices where a C5 connector is required.

Advantages

The cable provides a reliable connection between standard C14 mains outlets and devices with C5 sockets, combining a robust H05VV-F jacket with three 1.00 mm² conductors for stable power delivery at up to 250 V. Its straight C14 and C5 couplers are widely compatible with IEC inlet types used in laptop power bricks, small UPS units and other portable equipment. The 5 m length reduces the need for additional extensions while the PVC insulation offers mechanical protection and flexible routing.

Suitable for

• Powering laptop power supplies with C5 (“Mickey Mouse”) inlets
• Connecting small IT equipment and peripherals that use IEC C5 sockets
• Supplying compact UPS units or power adapters where a 5 m reach is required

Key specifications

• Cable type: H05VV-F, 3-core PVC insulated
• Conductor cross-section: 1.00 mm²
• Number of cores: 3
• Connector A: IEC C14 coupler (straight)
• Connector B: IEC C5 coupler (straight)
• Rated voltage: 250 V
• Length: 5 m
• Colour: Black

How to use

Insert the C14 coupler into the corresponding IEC C14 outlet on the mains or equipment-side distribution unit. Insert the C5 coupler into the device inlet designed for a C5 connector, ensuring both connectors are fully seated. Route the cable to avoid sharp bends, pinch points and high-temperature surfaces. Disconnect power before connecting or disconnecting the cable if required by the connected equipment. Inspect the cable periodically for damage to the jacket or connectors and replace if any faults are found.

Usage recommendations

Use this Alcasa C14-to-C5 cable only with devices compatible with IEC C5 inlets and within the 250 V rating. Avoid running the cable under heavy furniture or through doorways where it can be crushed, and keep it away from liquids and heat sources. For permanent installations or higher current requirements consult device specifications to ensure the 1.00 mm² conductor cross-section is appropriate.