Outdoor pedestal/post lighting Alogy PowerNeed AAL-02A, aluminium housing, black, 3000–5700K, PIR sensor, solar/Li-Ion, 14.8V

Alogy PowerNeed AAL-02A is an outdoor pedestal/post light with a marine-grade aluminium housing and black finish designed for off-grid area illumination. The unit integrates a 14.8 V Li‑Ion battery charged by a monocrystalline solar panel and offers adjustable colour temperature from 3000 K to 5700 K. A built-in passive infrared (PIR) motion sensor with a 120° detection angle and up to 8 m range controls brightness, while the housing meets IP66, IK10 and C4H corrosion protection for reliable operation in harsh outdoor conditions. The lamp is sized 465×532×459 mm and intended for garden, pathway and entrance lighting where a standalone solar solution is required.

Advantages

The AAL-02A provides fully autonomous solar operation with an integrated high-capacity lithium‑ion battery, eliminating the need for AC wiring and reducing operating costs. Downward-facing optics and adjustable colour temperature (3000–5700 K) give control over glare and visual comfort, while the PIR sensor with dimming conserves energy by switching between full and low-power modes. Robust construction—marine-grade aluminium, IP66 dust/water protection, IK10 impact resistance and C4H corrosion coating—ensures long-term durability in coastal or industrial environments. Integrated system monitoring and advanced battery management prolong service life and simplify maintenance.

Suitable for

• Garden and private outdoor areas
• Pathways and pedestrian routes
• Entrances to residential buildings and small facilities
• Parking edges and perimeter lighting where wiring is impractical
• Temporary or remote installations requiring off-grid power

Key specifications

• Housing: die-cast aluminium with protective coating (marine standard C4H)
• Finish: black
• Optics: downward-facing for reduced glare and light pollution
• Light source: high-efficiency LEDs with colour temperature range 3000–5700 K
• Luminous flux: up to 5,000 lm
• Colour temperature: adjustable between 3000 K (warm) and 5700 K (cool)
• Sensors: PIR motion sensor, 120° detection angle, detection range up to 8 m
• Power supply: solar-charged 14.8 V lithium‑ion battery (approx. 20 Ah / 296 Wh)
• Solar module: monocrystalline PV panel (approx. 16.2 V / 30 W)
• Protection rating: IP66 (dust and water protection)
• Impact resistance: IK10
• Corrosion protection: marine-grade coating (C4H)
• Typical illumination area: up to 150 m²
• Default operating mode example: full brightness for initial hours then PIR-controlled dimming until dawn
• Dimensions (approx.): 465 × 532 × 459 mm

How to use

Mount the AAL-02A on a suitable pedestal, post or wall bracket at the recommended height (up to 6 m) using the supplied stainless steel mounting hardware; the pole itself is not included. Position the solar panel for maximum sun exposure without significant shade to ensure reliable charging. After mounting, switch on the unit and set the desired colour temperature and default lighting mode following the embedded controls or configuration interface. The PIR sensor will automatically switch the light to full power when motion is detected and return to a low-power mode when the area is clear, with the integrated battery providing stored energy through nights and during low-insolation periods.

Usage recommendations

For best performance, install the luminaire where the solar panel receives direct sunlight for most of the day and avoid locations with persistent shading from trees or buildings. Regularly inspect mounting hardware and the solar surface for dirt, debris or salt buildup and clean gently as required to maintain charging efficiency. If installed in coastal environments, verify that fasteners and nearby structures are corrosion-resistant to preserve long-term mechanical integrity. Consider setting the colour temperature to 3000 K in foggy or rainy conditions to improve visibility, and 5700 K on clear nights when maximum perceived brightness is desired.