Drill Bit A Forged Tool 09089905

Alpen Stoneware Drill Bit (Blister pack 1 piece) with an 8.0 mm diameter is designed for drilling extremely hard stoneware. The bit is intended for rotary drilling only, does not require cooling during use and must not be used with hammer-drill functions. Observe the specified maximum rotation speed of 200 R.P.M.

Advantages

The stoneware drill bit provides precise drilling in very hard ceramic materials thanks to its designed cutting geometry. Because it does not require cooling, it simplifies operation and reduces preparation time. The restriction against hammer drilling protects the tool and the workpiece and helps maintain consistent hole quality.

Suitable for

• Drilling holes in extremely hard stoneware and similar dense ceramics
• Applications requiring slow, controlled rotary drilling
• Single-piece tasks where a blister-packed 8.0 mm bit is needed

Key specifications

• Brand: ALPEN
• Model / MPN: 300008001
• EAN: 9002741148851
• Type: Stoneware drill bit (single piece, blister pack)
• Diameter: 8.0 mm
• Maximum rotation speed: 200 R.P.M.
• Cooling required: No
• Hammer drilling: Not suitable

How to use

Mount the 8.0 mm Alpen stoneware bit in a drill capable of precise low-speed rotation. Set the drill to a rotation speed not exceeding 200 R.P.M. Use steady, moderate pressure and maintain a perpendicular angle to the work surface to achieve a clean hole. Do not engage the hammer function; operate in rotary mode only. No external cooling is required during drilling.

Usage recommendations

Before drilling, mark the hole position and, if possible, use a small center punch or starter to prevent bit walking. Periodically withdraw the bit to remove dust and check progress. If the bit shows signs of wear or damage, replace it to avoid poor-quality holes or breakage.