Wood Stain and Varnish ALTAX mahogany 0.25 L

ALTAX Wood Stain and Varnish in mahogany, 0.25 L is a combined wood treatment that both colours and seals wooden surfaces in one step. Formulated for use on interior and exterior wood, it provides a mahogany tone while creating a protective film that helps resist moisture and wear. The compact 0.25 L container is suitable for small projects and touch-ups on furniture, doors, window frames and decorative woodwork.

Advantages

This product combines staining and varnishing in a single coating, reducing application time and the number of products needed. Its formulation delivers an even mahogany colour while forming a protective surface film that improves resistance to moisture and light wear. The 0.25 L size is practical for precision work and smaller surfaces, allowing controlled application and minimal waste.

Suitable for

• Wooden furniture restoration and touch-ups
• Interior wooden doors and frames
• Exterior window frames and decorative trim (when used according to exposure conditions)
• Small carpentry and decorative woodwork requiring a mahogany finish

Key specifications

• Type: combined wood stain and varnish
• Colour: mahogany tone
• Volume: 0.25 L
• Application: brush, cloth or spray (depending on viscosity and equipment)
• Use: suitable for interior and exterior wooden surfaces
• Finish: coloured protective film providing surface sealing

How to use

Prepare the wooden surface by cleaning it of dust, grease and loose old coatings. Sand smooth any rough areas and remove sanding dust. Stir the product before use to ensure uniform colour and consistency. Apply a thin, even coat with a brush, lint-free cloth or appropriate spray equipment, following the wood grain. Allow the coating to dry fully according to ambient temperature and humidity before assessing whether an additional coat is needed. For exterior applications, follow local recommendations for substrate preparation and ensure adequate drying between coats.

Usage recommendations

Test the product on a concealed area or scrap wood to confirm the mahogany tone and adhesion before treating the entire surface. Use in well-ventilated areas, wear suitable protective gloves and follow safety guidelines on the product label. Store the container tightly closed in a cool, dry place away from direct sunlight and ignition sources.