Festoon LED bulb Amio C5W 15x SMD 3014 12V 39mm

Amio C5W 15x SMD 3014 12V 39mm festoon LED bulb is a compact replacement lamp for 39 mm C5W fittings in automotive interior lights, license plate lamps and other small fixtures that accept a 12 V supply. The bulb integrates 15 SMD 3014 LED chips arranged to provide even light distribution while keeping power consumption low and maintaining a slim profile for easy installation into standard festoon holders.

Advantages

This Amio festoon LED bulb delivers higher luminous efficiency and lower energy consumption compared with conventional incandescent C5W lamps. Its compact 39 mm length and standardized festoon end contacts allow straightforward plug-in replacement without modifications to existing sockets. The use of SMD 3014 diodes ensures consistent illumination across the fixture and a longer operating life under normal automotive voltage conditions.

Suitable for

• Automotive interior dome and map lights designed for 39 mm festoon bulbs
• License plate illumination where a 12 V festoon lamp is specified
• Small decorative or utility fixtures that accept 39 mm C5W fittings

Key specifications

• LED type: 15 × SMD 3014 chips
• Nominal voltage: 12 V DC
• Physical length: 39 mm (festoon form factor)
• Connection: Festoon end contacts for 39 mm sockets
• Power consumption: low (LED technology)

How to use

Ensure the vehicle or fixture power is switched off before replacing the bulb. Remove the existing 39 mm C5W lamp from its festoon holder by gently compressing the ends and sliding it out of the clips, then insert the Amio LED festoon so the end contacts sit securely in the socket. Restore power and verify correct orientation; if the bulb does not light, rotate 180° and reinsert (polarity-sensitive in some circuits). No additional wiring or drivers are required for typical 12 V automotive installations that accept LED festoon bulbs.

Usage recommendations

Use the Amio C5W 15x SMD 3014 12V 39mm in fixtures rated for 12 V DC and 39 mm festoon bulbs. Avoid installing in fixtures with integrated current-limiting or monitoring electronics designed only for incandescent lamps unless the vehicle manufacturer specifies LED compatibility. For best results, check fit and clearance inside the lamp housing and confirm legal requirements for exterior lighting such as license plate illumination in your region.