Bulb Amio T10e COB LED 12V — white, automotive interior/indicator lamp

Amio T10e COB LED 12V is a compact white LED bulb designed for 12V automotive applications with a T10 socket. Using COB (chip-on-board) LED technology, this lamp delivers a smooth, uniform light output that reduces visible hotspots and improves light distribution compared with discrete LED arrays. The bulb is intended as a direct replacement for standard T10 incandescent lamps in interior lighting, dashboard indicators and side marker positions, offering low power consumption and a compact form factor suitable for confined lamp housings.

Advantages

The COB construction provides even illumination and a consistent color temperature across the emitting surface, improving visibility for interior and indicator lighting. Low power draw reduces load on vehicle electrical systems and helps prevent fuse failures associated with higher-current incandescent bulbs. The small size and standard T10 base make installation straightforward without modifications to existing sockets or housings.

Suitable for

• Interior dome and map lights
• Dashboard and instrument panel indicators
• Side marker and courtesy lamps

Key specifications

• Operating voltage: 12 V DC
• Bulb type: T10 (wedge base)
• LED technology: COB (chip-on-board)
• Light color: white
• Form factor: compact, low-profile
• Intended use: automotive interior and indicator lighting

How to use

Ensure the vehicle ignition is off and the lamp circuit is not powered before attempting replacement. Remove the old T10 bulb from the socket by gently pulling it free from the wedge base. Insert the Amio T10e COB LED into the same socket, confirming proper seating and polarity where applicable. Restore power and verify correct operation; if the bulb does not light, remove and rotate 180° to correct polarity in non-polarity-protected circuits. Handle the bulb by its base and avoid touching the emitting surface unnecessarily to keep the lens clean.

Usage recommendations

Use this bulb in compatible 12 V automotive systems and check fitment in the lamp housing before final installation. For circuits with bulb-monitoring or CAN-based error detection, an external resistor or CAN-compatible flasher may be required to avoid lamp-out warnings. Replace bulbs in pairs for consistent color and brightness across symmetrical lighting positions.