Cutting Disc for Metal Andre 125 x 1.6 mm PRO LINE 95A46R

Andre Cutting Disc for Metal PRO LINE 95A46R, 125 x 1.6 mm, is a thin abrasive wheel engineered for cutting ferrous metals and stainless steel (inox) with a narrow kerf. The 1.6 mm thickness reduces material waste and enables precise, fast cuts through pipes, profiles and sheet metal. Designed to be used with 125 mm angle grinders, this disc is intended for manual metalworking, construction and repair tasks where clean, controlled cuts and efficient material removal are required.

Advantages

The disc’s 1.6 mm thin design provides a reduced cutting kerf for minimal material loss and faster cutting speed compared with thicker wheels. The abrasive formulation and reinforced construction deliver consistent cutting performance on steel and stainless steel while maintaining stability during operation. Compatibility with standard 125 mm angle grinders makes it easy to fit and replace, supporting continuous work with predictable results.

Suitable for

• Cutting steel pipes and metal profiles
• Separating sheet metal panels and brackets
• On-site repair and installation work in construction
• Manual metal fabrication and light industrial cutting tasks

Key specifications

• Diameter: 125 mm
• Thickness: 1.6 mm
• Intended material: ferrous metals and stainless steel (inox)
• Typical mounting: for 125 mm angle grinders
• Abrasive type: hard composite for metal cutting

How to use

Mount the disc securely on a compatible 125 mm angle grinder following the tool manufacturer’s instructions. Ensure the grinder is disconnected from power when fitting the wheel and that the disc rotation direction matches the grinder’s arrow. Operate the grinder at the recommended speed and apply steady, even pressure to let the abrasive do the cutting; avoid excessive force which can reduce disc life and increase heat. Use controlled passes to achieve clean cuts through pipes, profiles or sheet metal, and allow the disc to cool between long cuts where necessary.

Usage recommendations

Wear appropriate personal protective equipment: eye protection, gloves, hearing protection and a dust mask. Secure the workpiece with clamps or a vice and clear the work area of flammable materials. Do not use the disc for grinding, side polishing, or on non-recommended materials. Replace the disc if it is cracked, chipped or warped.