Flap Disc Andre 125 mm P40 (ECO LINE, Version IV)

Flap Disc Andre 125 mm P40 (ECO LINE, Version IV) is an abrasive flap disc for angle grinders, designed for material removal, surface blending and deburring of edges. With coarse P40 grit and a 125 mm diameter, it provides aggressive stock removal on metal and other hard surfaces, enabling faster shaping, weld seam preparation and effective paint or rust elimination in workshop and construction settings.

Advantages

The disc combines a layered abrasive flap construction with a reinforced backing that maintains stability under higher pressure, delivering consistent cutting performance and even wear across the disc. The ECO LINE formulation balances cutting speed and service life for economical use during coarse grinding tasks. Its 125 mm size fits common angle grinder flanges and offers a practical balance between reach and control.

Suitable for

• Coarse grinding and shaping of steel and other hard metals
• Removal of paint, rust and surface contaminants
• Weld seam blending and joint preparation
• Edge deburring and chamfering in fabrication and repair work
• General workshop and construction metalworking tasks

Key specifications

• Disc diameter: 125 mm
• Abrasion grit: P40 (coarse)
• Disc type: Flap disc (layered abrasive flaps)
• Suitable tool: Angle grinder
• Typical applications: Material removal, surface blending, deburring
• Design line: ECO LINE

How to use

Install the flap disc on a compatible 125 mm angle grinder following the tool manufacturer’s mounting instructions and ensure the disc is tightly secured. Start grinding at low speed to position the disc, then apply steady, moderate pressure while moving the disc across the workpiece to avoid gouging. Keep the disc at a shallow angle for surface blending and a slightly higher angle for aggressive material removal. Allow the abrasive flaps to wear evenly and replace the disc when effectiveness declines or if any damage appears.

Usage recommendations

Use appropriate personal protective equipment including eye protection, gloves and hearing protection. Maintain proper ventilation and avoid excessive side pressure or twisting motions that can overload the disc. Match disc speed limits to the grinder’s rated RPM and choose P40 grit for coarse work while switching to finer grits for finishing passes.