Resin for 3D printing AnyCubic UV Skin 1 kg

AnyCubic UV Skin 1 kg is a photopolymer resin formulated for UV/LCD/DLP 3D printers. Supplied in a 1 kg bottle, this resin targets fine-detail applications where surface smoothness and dimensional definition are important. It cures under compatible UV wavelengths and is intended for producing prototypes, miniatures and functional parts when high surface quality is required. Handle and store according to safety guidance for photopolymer materials.

Advantages

The resin provides good surface finish and captures fine details, reducing the need for extensive post-processing. Its viscosity and curing profile are balanced for typical desktop UV/LCD/DLP printers, enabling consistent layer adhesion and predictable curing. Packaged in a 1 kg container, it is suitable for repeated small to medium production runs and hobby projects where cost-efficiency and print quality must be balanced.

Suitable for

• High-detail miniatures and models
• Prototype parts requiring smooth surfaces
• Small functional parts and assemblies
• Hobby and tabletop gaming figures

Key specifications

• Form: liquid photopolymer resin
• Net volume: 1 kg bottle
• Compatibility: UV/LCD/DLP 3D printers using appropriate UV wavelengths
• Intended use: fine-detail printing with smooth surface finish

How to use

Before printing, shake the bottle well to ensure homogeneous pigment and polymer distribution. Pour resin into the printer vat following the printer manufacturer's instructions and fill to the recommended level. Set exposure times and layer thickness according to your printer, resin temperature and desired detail; perform a small test print to optimize parameters. After printing, wash parts in isopropyl alcohol or an approved solvent to remove uncured resin, then post-cure under a compatible UV source to achieve full mechanical properties and surface stability. Wear appropriate gloves and eye protection when handling uncured resin and ensure adequate ventilation.

Usage recommendations

Store the resin in a cool, dark place away from direct sunlight and heat sources. Keep the bottle tightly closed when not in use. Dispose of uncured resin and contaminated cleaning solvents according to local regulations for chemical waste. For best results, calibrate exposure settings for your specific printer and maintain clean vat and build platform to avoid print defects.

Keywords: AnyCubic UV Skin 1 kg, UV resin, LCD resin, DLP resin, 3D printing resin, high-detail resin, smooth surface resin.