Resin for 3D printing AnyCubic Tough White 1 kg — high-strength photopolymer

AnyCubic Tough White is a 1 kg photopolymer resin formulated for additive manufacturing on SLA, DLP and LCD 3D printers that accept third‑party resins. The material is targeted at applications where increased mechanical strength and durability are required compared with standard clear or general‑purpose resins. It prints with fine detail and produces smooth surfaces that respond predictably to post‑curing, making it suitable for functional prototypes, mechanical components and end‑use parts that demand dimensional stability.

Advantages

Tough White combines higher impact resistance and improved tensile properties relative to many standard resins while maintaining good print fidelity and surface finish. The resin offers reliable post‑cure behavior, consistent layer adhesion and compatibility with common resin printing workflows. It is supplied in a 1 kg container for convenient handling and refill cycles.

Suitable for

• Functional prototypes requiring increased strength and durability
• Mechanical parts, housings and fixtures with moderate load-bearing requirements
• End‑use models that need smooth surface finish and dimensional stability
• Small batches and iterative design verification where detail and repeatability matter

Key specifications

• Form: photopolymer liquid resin
• Color: white
• Net weight: 1 kg
• Compatibility: SLA, DLP and LCD resin printers accepting third‑party materials
• Print characteristics: fine detail reproduction and smooth surface finish
• Properties: increased toughness and improved durability compared with general‑purpose resins

How to use

Shake or stir the bottle gently before use to ensure pigment and additives are evenly distributed. Pour the required amount into the printer resin vat following the printer manufacturer's safety and handling instructions. Expose and print using appropriate layer thickness and exposure settings for white, tough resins; adjust exposure times if necessary based on test prints and your printer model. After printing, remove parts carefully, rinse in isopropyl alcohol or the recommended cleaning solvent, then allow to dry fully before post‑curing under a suitable UV source to reach final mechanical properties.

Usage recommendations

Use personal protective equipment such as gloves and eye protection during handling. Store the resin in a cool, dark place away from direct sunlight and heat sources. Perform test prints and exposure calibration when switching from other materials to establish optimal print settings and post‑cure times for your specific printer and application.