Filament AnyCubic High Speed PLA IPHHSGY-106 — 1 kg, Gray

AnyCubic High Speed PLA filament (1 kg, Gray) is formulated for faster 3D printing while maintaining dimensional accuracy and detail. The optimized PLA composition and consistent filament diameter enable smooth feeding, rapid layer solidification and printing precision of ±0.02 mm. The spool is intended for general-purpose 3D printing tasks such as prototyping, display models and hobby parts where reduced print time and reliable results are required.

Advantages

The filament allows significantly higher printing speeds thanks to an inner core and material formulation optimized for high-speed extrusion, enabling feed rates up to 500 mm/s on compatible machines. It provides even flow through the nozzle, reduced risk of clogs and stable diameter tolerance for uninterrupted printing. Finished parts exhibit sharp details and smooth surfaces due to fast cooling and consistent layer formation.

Suitable for

• Rapid prototyping and iterative design models
• Display models and visual mock-ups
• Hobbyist prints and functional non-load-bearing parts
• Situations requiring shorter print turnaround times

When it may not be suitable

This PLA is not intended for high-temperature structural applications or parts that must withstand sustained heat above its heat distortion temperature (56°C). For projects that require high flexibility, chemical resistance or structural load-bearing capacity, alternative materials such as ABS, PETG or engineered filaments may be more appropriate.

Key specifications

• Material: PLA (polylactide)
• Colour: Gray
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Density: 1.26 g/cm³
• Length: 330 m
• Printing accuracy: ±0.02 mm
• Elongation at break: 12%
• Tensile strength: 54 MPa
• Bending strength: 74 MPa
• Izod impact strength: 46 J/m
• Melting point: 165°C
• Heat distortion temperature: 56°C
• Melt index: 4-69 g/10 min
• Recommended storage: dry and ventilated environment

How to use

Heat the hotend to the recommended temperature range for your chosen print speed before loading the filament to reduce the risk of blockages; for example, use 190–210°C at lower speeds, 210–230°C at moderate speeds and 230–260°C for very high-speed printing. Use a stable 3D printer with a 1.75 mm filament path, ensure the build surface is prepared (fine magnetic sticker recommended) and enable part cooling at high percentage for best surface quality. Store unused filament in a dry, ventilated place and dry at around 50°C if necessary before use.

What to consider before purchase

• Confirm your printer supports 1.75 mm filament and intended high print speeds
• Check maximum hotend temperature of your printer to match recommended nozzle temperatures
• Consider the heat distortion temperature (56°C) for end-use conditions
• Plan for filament drying and dry storage if printing in humid environments

Usage recommendations

For reliable high-speed results, set nozzle temperature according to print speed (190–210°C for 50–150 mm/s; 210–230°C for 150–300 mm/s; 230–260°C for 300–600 mm/s), use 100% part cooling, a build platform temperature of 50–60°C and a fine magnetic sticker surface. Use PVA as recommended for soluble supports and keep pull-in (retraction) and feed rates within printer capabilities to avoid under-extrusion.