PLA filament AnyCubic IPHPLWH-106, 1 kg spool, white, FDM

PLA Anycubic Filament 1 KG (White) is a 1 kg spool of 1.75 mm PLA filament designed for FDM 3D printers. The filament is biodegradable, produced from lactic acid, and comes wound to minimize tangles. It delivers consistent diameter tolerance of ±0.02 mm for reliable, detailed prints and is compatible with the Anycubic Color Engine Pro RFID system for automated print-setting selection.

Advantages

The filament’s tight diameter tolerance ensures precise layer deposition, sharp details and smooth surfaces while reducing the chance of jams. The spool is evenly wound to prevent tangles and interruptions during printing. Made from lactic acid–based PLA, the material is biodegradable. When used with an RFID-enabled Color Engine Pro, the system can automatically identify filament type and apply optimized temperature, speed and retraction settings to reduce setup time and material waste.

Key specifications

• Manufacturer: Anycubic
• Model: IPHPLWH-106
• Material: PLA (polylactic acid)
• Color: White
• Weight: 1 kg
• Diameter: 1.75 ±0.02 mm
• Total length: Approximately 330 m
• Nozzle temperature: 200–210 °C (high-speed 190–230 °C)
• Heated bed temperature: 50–60 °C
• Tensile strength: 61 MPa
• Hardness: 81D
• Density: 1.23 g/cm³

How to use

Heat the printer nozzle above 230 °C before installing or replacing the filament to prevent nozzle clogging, then load the filament into your FDM printer. If using Color Engine Pro with RFID, insert the spool so the system can detect filament type and apply recommended settings automatically; otherwise set nozzle and bed temperatures according to the specifications above and perform standard bed leveling and first-layer calibration. Print speeds and retraction settings may be adjusted within manufacturer-recommended ranges to balance surface finish and print time.

Рекомендации

Store the filament in a dry environment or sealed with desiccant to maintain print quality. For best results on full-color translucent models, use compatible printers (for example Kobra 3 Combo) and experiment with CMYK translucent filaments in layered ratios to achieve the desired color effects.