Build Plate AnyCubic Cool Plate for Kobra S1 / S1 Combo – Replaceable 3D printer print surface

Anycubic Cool Plate Build Plate for the Kobra S1/S1 Combo is a replacement build surface designed to improve first-layer adhesion for PLA at lower bed temperatures. The plate features a specially coated surface that helps PLA stick reliably at around 45°C, producing a subtle matte finish on the model bottom while reducing the need for high-temperature printing.

Advantages

The special coating increases PLA adhesion at lower bed temperatures, which lowers energy consumption and reduces warping or peeling during prints. The durable surface maintains its adhesion properties over time, decreasing the frequency of replacements. The plate also gives the first layer a consistent matte appearance that improves the aesthetic of printed parts.

Suitable for

• Users of Anycubic Kobra S1 and Kobra S1 Combo printers
• Printing PLA where stable adhesion at moderate bed temperature is preferred
• Small or detailed prints that benefit from improved first-layer reliability
• Users seeking a matte finish on the model bottom

When it may not be suitable

This Cool Plate is optimized specifically for PLA adhesion at around 45°C and may not provide the same advantages for filaments that require higher bed temperatures, such as ABS or some flexible materials. If you routinely print materials that need hotter beds or specialized surfaces, this plate might not meet those requirements.

Key specifications

• Compatible printers: Anycubic Kobra S1, Kobra S1 Combo
• Surface: specially coated build plate designed to increase PLA adhesion
• Recommended bed temperature for PLA: approx. 45°C
• First layer finish: matte

How to use

Install the Cool Plate according to the printer manufacturer’s instructions for the Kobra S1 series, ensuring the bed is clean and properly leveled before printing. Set the bed temperature to around 45°C when printing PLA and allow the plate to reach the target temperature before starting the print. After printing, wait for the plate to cool slightly if needed for easier part removal and follow normal maintenance to keep the surface free of debris.

What to consider before purchase

• Suitable filament types: optimized for PLA adhesion at moderate temperatures
• Compatibility: designed for Anycubic Kobra S1 and Kobra S1 Combo
• Desired finish: provides a matte first-layer appearance

Usage recommendations

For best results with PLA, use a bed temperature near 45°C, ensure the build plate is clean and the nozzle height is correctly calibrated for a consistent first layer. For other filament types, check material-specific bed temperature requirements and consider alternative build surfaces if higher temperatures are needed.