3D printer resin AnyCubic ABS-Like Resin Pro 2 Grey 1 kg

AnyCubic ABS-Like Resin Pro 2 Grey is a 1 kg vat photopolymer resin formulated to deliver ABS-like mechanical properties and fine surface detail on standard UV curing 3D printers. The improved Pro 2 formulation increases tensile strength and elongation at break compared with the previous version, while offering low odor, good color saturation and reduced shrinkage to maintain dimensional stability for functional prototypes, structural components and small mechanical parts.

Advantages

The resin provides increased durability and bending resistance, improved tensile strength (35–40 MPa) and higher elongation at break (35–40%), which reduces the risk of cracking during use. Reduced shrinkage and lower viscosity enable high precision with sharp detail reproduction and faster curing times. Wide compatibility across UV wavelengths from 365 to 405 nm and good adhesion to the build platform simplify integration with most DLP and LCD printers.

Suitable for

• Functional prototypes and industrial prototypes
• Structural components and fittings requiring higher mechanical strength
• Small mechanical parts and accurate visual models
• Applications on DLP/LCD printers operating at 365–405 nm

Key specifications

• Manufacturer: AnyCubic
• Model: 2Pro
• Color: Grey
• Net weight: 1 kg (vat photopolymer resin)
• UV wavelength: 365–405 nm
• Density: 1.05–1.25 g/cm³
• Viscosity: 300–400 cP (mPa·s)
• Hardness: 82–84D
• Tensile strength: 35–40 MPa
• Elongation at break: 35–40%
• Shrinkage (formability): 4.3–5.6%
• Flexural strength: 35–40 MPa
• Flexural modulus: 1400–1800 MPa
• Heat resistance temperature: 60–65°C
• Resin washing: Alcohol
• Shelf life: 1.5 years
• MPN: SABP2GY-102A
• EAN: 6974662350947

How to use

Pour the AnyCubic ABS-Like Resin Pro 2 Grey into the printer vat according to the printer manufacturer's instructions. Use a 3D printer that cures at 365–405 nm and set exposure and layer parameters based on the printer model and part geometry; start from the recommended exposure settings for ABS-like resins and adjust if necessary. After printing, wash parts with alcohol to remove uncured resin, then perform post-curing according to the manufacturer's guidelines to achieve final mechanical properties.

Usage recommendations

Handle the resin with gloves and eye protection, use in a well-ventilated area or with local extraction despite its low odor, and store the sealed resin in a cool, dark place away from direct sunlight. Follow safety and disposal instructions provided by AnyCubic and your printer manufacturer.