Oiling sponge ANZA 7311490046168 26.5 x 8.5 cm for terraces

Oiling sponge ANZA 26.5 x 8.5 cm is designed for applying oil and protective treatments to terrace boards and other outdoor wooden surfaces. The sponge head and ergonomic shape enable an even, controlled distribution of oil, making it easier to treat grooves, edges and profile surfaces. The tool is intended for maintenance and seasonal refinishing of decking, garden furniture and other timber exposed to weather.

Advantages

The ANZA oiling sponge distributes oil uniformly to reduce streaks and puddles, which helps avoid unnecessary product waste compared with rags. Its compact dimensions and flexible sponge material facilitate access to narrow gaps and board joints. The design allows steady application pressure and good control along edges and profiles, resulting in a consistent finish without aggressive abrasion.

Suitable for

• Applying deck oil and protective wood treatments on terraces
• Seasonal maintenance of wooden garden furniture
• Treatment of wooden stairs, railings and outdoor cladding
• Oiling narrow grooves and board edges where brushes are less effective

Key specifications

• Working area dimensions: 26.5 x 8.5 cm
• Material: absorbent sponge suitable for oil-based and solvent-based wood treatments
• Shape: rectangular sponge for edge and groove access
• Intended use: manual application of oils and protective finishes on exterior wood

How to use

Shake or stir the chosen oil or treatment according to the manufacturer's instructions. Saturate the sponge lightly — avoid overloading to prevent dripping. Apply the oil with even strokes along the grain, maintaining moderate pressure to work the product into the wood and joints. For grooves and edges, use the sponge edge to reach confined areas. Wipe off any excess oil within the time recommended by the finish manufacturer to ensure even penetration and uniform drying.

Usage recommendations

Use personal protective equipment such as gloves and ensure adequate ventilation when working with solvent-based treatments. Test the oil and application method on a small, inconspicuous area before treating the entire surface. Clean or replace the sponge as recommended by the oil manufacturer's safety guidance and dispose of used oily rags or sponges safely to avoid fire hazards.