HDMI cable Aptel HDMI-10-V2.1/8K 10 m — HDMI 2.1, 10 meters, 8K support

The Aptel HDMI cable HDMI-10-V2.1/8K is a 10-metre high-speed video/audio cable built to the HDMI 2.1 specification and intended for long-distance connections that require high bandwidth. It is designed to carry 8K video signals and advanced audio formats between source devices and displays or AV equipment, making it suitable for home cinema setups, living rooms and meeting spaces where resolution and signal integrity over distance are important.

Advantages

This 10 m HDMI 2.1 cable supports higher bandwidth needed for 8K content and is constructed to reduce signal degradation over longer runs. It provides a single-cable solution for transporting high-resolution video, multi-channel audio and control signals, which simplifies installation and reduces cable clutter. The compliance with HDMI 2.1 features ensures compatibility with modern TVs, consoles and AV receivers that require increased data throughput.

Suitable for

• Connecting 8K-capable TVs and projectors to media players or AV receivers over a 10 m distance
• Home theater systems and living room installations where high-resolution video is required
• Conference rooms and classrooms needing long HDMI runs without additional signal extenders
• Game consoles and high-end PCs that output high frame rates and resolutions

When it may not be suitable

This cable is intended for applications that benefit from HDMI 2.1 bandwidth and 8K support; it may be unnecessary for setups that only use lower resolutions such as 1080p or basic 4K with low refresh rates. In installations that require runs significantly longer than 10 metres or that have challenging routing with severe electromagnetic interference, an active cable, fibre HDMI solution or a signal extender may be more appropriate.

Key specifications

• Length: 10 metres
• HDMI standard: HDMI 2.1 compliant
• Video support: up to 8K resolution (per HDMI 2.1 specification)
• Audio support: multi-channel digital audio formats supported via HDMI
• Connector type: standard HDMI A to HDMI A

How to use

Connect one end of the Aptel HDMI cable to the HDMI output of the source device (such as a Blu-ray player, game console or PC) and the other end to the HDMI input on the display, projector or AV receiver. Ensure both devices are powered off or switched to the appropriate input when making the connection. After connecting, power on the devices and select the correct HDMI input on the display. If using advanced features such as high refresh rates or HDR at 8K, confirm that both source and display settings are configured to enable those modes.

What to consider before purchase

• Confirm that both your source device and display support HDMI 2.1 features and the required resolutions/refresh rates.
• Verify that a 10 m passive cable is suitable for your installation distance and routing; consider active or fibre solutions for longer runs or noisy environments.
• Check connector accessibility on devices to ensure a standard HDMI A connector fits available ports without strain.

Usage recommendations

For reliable 8K/60Hz or high-frame-rate 4K operation over 10 m, use short, neat cable runs avoiding tight bends and strong EMI sources. If signal issues appear, test shorter cable lengths or use devices with verified HDMI 2.1 output to isolate the cause.