Power cable Aqua-Computer 93111 — internal 3-pin power supply cable for RPM/signal (model 93111)

The Aqua-Computer 93111 internal 3-pin power cable is designed to provide a compact, reliable connection for RPM and signal devices inside PC systems and liquid-cooling setups. It supplies internal voltage and signal transmission through three conductors, enabling the operation and monitoring of fans, sensors, or compatible Aqua-Computer components that use a three-pin interface. The cable is intended for use inside a chassis or enclosure where a short, dedicated power/signal link is required.

Advantages

The cable offers a simple three-conductor design for combined power and RPM/signal lines, ensuring straightforward installation and minimal wiring clutter. As an accessory from Aqua-Computer, it is compatible with the brand's devices that accept a 3-pin connection and can be used with other hardware following the same pinout. Its internal construction is optimized for chassis routing and secure electrical contact without adding external connectors or adapters.

Suitable for

• Supplying power and RPM/signal to internal fans or tachometers
• Connecting Aqua-Computer sensors and modules that use a 3-pin interface
• Short internal wiring runs inside PC cases and liquid-cooling enclosures
• Replacing or extending existing internal 3-pin power/signal leads

Key specifications

• Connector type: internal 3-pin power/signal connector
• Conductors: three-wire configuration for power and RPM/signal
• Intended use: internal chassis or enclosure wiring for PC and cooling systems
• Compatibility: designed for devices using a standard 3-pin power/signal interface

How to use

Route the cable inside the PC case or cooling enclosure from the power source or controller to the target device, ensuring connectors are properly aligned before insertion. Connect the three-pin plug to the device's matching socket, observing the correct orientation for power and signal pins. Secure any excess cable to prevent contact with moving parts and verify that connected devices receive power and report RPM/signal as expected before closing the system.

Usage recommendations

For reliable operation, use the cable only for internal connections in dry, protected environments inside a computer chassis or compatible enclosure; avoid routing near sharp edges or high-temperature components and check pin orientation to prevent incorrect wiring.