Water filter Aquaphor Gross 10 – replacement cartridge, model 210120

Aquaphor Gross 10 replacement cartridge (model 210120) is a sediment pre-filter designed to remove sand, rust, silt and other coarse particles from municipal and well water. Intended for domestic and commercial water filtration systems, the cartridge reduces particulate load before the main filter stage, helping to protect downstream filters, valves and appliances. The Gross 10 cartridge fits inline housings and can be used as part of whole-house or under-sink configurations where primary sediment removal is required.

Advantages

The Aquaphor Gross 10 cartridge provides reliable mechanical filtration of large and medium-sized particles, extending the life and performance of subsequent filter stages. Its pleated or depth-media design (depending on housing type) offers a high dirt-holding capacity while maintaining flow rate suitable for household and light commercial use. The cartridge is compatible with common sediment housings and is easy to install and replace, requiring no special tools or chemicals.

Suitable for

• Pre-filtration in whole-house water systems to protect plumbing and appliances
• Under-sink installations as a first-stage sediment filter
• Municipal or well water with visible sand, rust particles or suspended solids
• Commercial points-of-use where coarse particle removal is needed

Key specifications

• Function: mechanical sediment and particulate removal
• Typical particle retention: coarse and medium particles such as sand, rust and silt
• Form factor: cartridge compatible with standard inline sediment housings
• Flow characteristics: designed to maintain suitable flow for household and light commercial systems
• Material considerations: manufactured from filtration media intended for sediment capture (non-chemical treatment)

How to use

Install the Aquaphor Gross 10 cartridge inside a compatible sediment filter housing according to the housing manufacturer’s instructions. Shut off the water supply and relieve system pressure before opening the housing. Insert the cartridge ensuring correct orientation and seals, then reassemble the housing and restore water flow. Check for leaks and run water for a few minutes to flush any loose particles. Replace the cartridge at intervals based on visible clogging, pressure drop across the housing, or the schedule recommended by the system installer.

Usage recommendations

For optimal performance, use the Gross 10 as the first filtration stage to protect finer filter media downstream. Monitor inlet water quality and pressure; increase replacement frequency if water contains heavy sediment or if flow decreases. Where chemical or microbial contamination is a concern, combine this cartridge with appropriate additional treatment stages designed to address those specific contaminants.