Spray Primer, Army Painter The: Colour Primer — Daemonic Yellow (2022) aerosol

Army Painter The: Colour Primer — Daemonic Yellow (2022) aerosol is a spray primer formulated to deliver an even, adherent base coat for miniatures and scale models. Designed for use on plastic, resin and metal surfaces, this primer lays down a consistent yellow foundation that improves paint adhesion while preserving fine surface detail. The aerosol format enables quick, uniform coverage on complex shapes and textured surfaces, making it suitable for hobbyists and model painters preparing parts for acrylic paints and washes.

Advantages

This aerosol primer provides uniform coverage and good adhesion on common modeling substrates without obscuring sculpted details. The Daemonic Yellow tone creates a bright, warm base that reduces the number of opaque paint layers required for vibrant topcoats. The spray format offers fast application over large areas and recessed details alike, and the formulation is designed to be compatible with standard acrylic hobby paints and washes when fully cured.

Suitable for

• Priming plastic miniatures before acrylic painting
• Preparing resin models and castings for basecoats
• Priming metal figures and components prior to painting
• Rapid basecoating of multiple parts or large models

Key specifications

• Format: aerosol spray for even, fast coverage
• Finish: matte to semi-matte base suitable for acrylics
• Colour: Daemonic Yellow (bright warm yellow base)
• Compatibility: intended for use under acrylic paints and washes
• Substrate suitability: plastic, resin, metal

How to use

Shake the can well before use and follow the manufacturer's safety instructions printed on the packaging. Work in a well-ventilated area and protect surrounding surfaces. Hold the can approximately 20–30 cm from the model and apply thin, even coats using sweeping motions; allow each coat to flash off briefly before applying the next to avoid runs and loss of detail. Build up coverage with multiple light passes until a uniform base is achieved. Allow the primer to fully cure before applying acrylic paints or washes.

Usage recommendations

For best results, clean and degrease parts prior to priming, and remove any mold release agents. Test-spray on a spare piece to confirm coverage and spray distance. When working with fine details, consider masking or using a reduced spray distance with lighter passes. Ensure full curing time before handling to prevent fingerprints or surface contamination.