LED strip ART SMD5050 5 m, 30 LEDs/m, 7.2 W/m, 12 V, RGB multicolor

ART SMD5050 LED strip is a 5-meter RGB multicolor lighting tape with a density of 30 LEDs per meter and a nominal power consumption of 7.2 W per meter. Designed to run from a 12 V DC supply, this flexible LED strip produces a range of colors when used with a compatible RGB controller, enabling adjustable accent and decorative lighting for residential and commercial interiors.

Advantages

The LED strip combines consistent light output with low voltage operation for safer installation and compatibility with common 12 V power supplies. Its SMD5050 diodes deliver vivid multicolor reproduction and smooth color transitions when paired with standard RGB controllers. The 5 m continuous length provides extended run time without frequent joins, and the moderate power draw of 7.2 W/m helps manage energy use while maintaining brightness suitable for accent and backlighting applications.

Suitable for

• Under-cabinet and under-shelf accent lighting in kitchens and workspaces
• Backlighting for displays, cabinets, and signage
• Decorative perimeter lighting in living rooms, bedrooms, and entertainment areas
• Indirect lighting in commercial interiors, bars, and retail showcases

Key specifications

• Length: 5 m continuous strip
• LED density: 30 LEDs per meter
• Power consumption: 7.2 W per meter
• Operating voltage: 12 V DC
• LED type: SMD5050 multicolor (RGB)
• Color: RGB multicolor (requires compatible controller for color selection)

How to use

Prepare a suitable 12 V DC power supply and a compatible RGB controller before installation. Measure and clean the mounting surface to ensure adhesion if the strip includes adhesive backing, or use appropriate mounting clips for permanent installation. Connect the strip correctly to the RGB controller following the polarity and channel markings, then connect the controller to the 12 V power supply. Test the strip and adjust color and brightness settings via the controller. If cutting the strip is necessary, cut only at indicated cut points and re-seal connections to protect from dust and moisture as required.

Usage recommendations

Use a power supply with sufficient wattage allowance for the full 5 m length (calculate total power = 7.2 W/m × length). For even color consistency on long runs or installations with multiple power feed points, consider supplying power at both ends or every few meters. Use a compatible RGB controller rated for the strip's voltage and current. Avoid direct exposure to water unless the strip's IP rating confirms suitable protection; in damp or outdoor locations choose an appropriately protected variant. Follow manufacturer guidance for cutting and soldering to maintain circuit integrity.