Circular Saw Blade Art-Pol 200 mm x 30 mm, 60 teeth, tungsten carbide (model 42206)

Art-Pol circular saw blade 200 mm x 30 mm with 60 tungsten carbide teeth is designed for precise crosscuts and rip cuts in solid wood and wood-based panels. The blade features carbide-tipped teeth that retain sharpness and provide a fine surface finish, while the 200 mm diameter and 30 mm bore fit many table saws, mitre saws and stationary circular saws with the corresponding arbor. This model is intended for general woodworking tasks where accuracy and long-lasting cutting edges are required.

Advantages

The tungsten carbide teeth ensure extended durability and consistent cutting performance compared with standard steel blades. A 60-tooth configuration delivers a balance between cutting speed and surface quality, producing smooth edges with minimal tear-out on plywood, MDF and laminated boards. The blade’s construction reduces the need for frequent sharpening and contributes to stable operation on table or mitre saws.

Suitable for

• Crosscutting solid wood with a fine finish
• Ripping and trimming wood-based panels (plywood, MDF, particleboard)
• Use on table saws, mitre saws and stationary circular saws with matching 30 mm arbor

Key specifications

• Diameter: 200 mm
• Bore (arbor) diameter: 30 mm
• Tooth count: 60 teeth
• Tooth material: tungsten carbide tips
• Intended material: solid wood and wood-based panels

How to use

Install the blade on a saw with a compatible 30 mm arbor following the machine manufacturer’s instructions and ensure the saw is powered off and disconnected from the mains before fitting. Check blade direction markings and tighten the arbor flange to secure the blade. Adjust cutting depth and fence settings according to the workpiece and perform a test cut on scrap material to confirm alignment and finish quality. Use appropriate feed rate and steady pressure to avoid overheating or chipping.

Usage recommendations

Wear appropriate personal protective equipment (safety glasses, hearing protection and gloves as required). Maintain recommended saw speeds for the blade diameter and avoid cutting metal or materials not intended for this blade. Regularly inspect the blade for chips or uneven wear and replace or recondition carbide-tipped teeth when cutting quality declines.