In cart {{totalProductsCount}} item(s)
Your cart is empty
Drill bit Art-Pol 24 x 450 mm SDS-plus
Cheapest delivery:
Venipak Locker LV
Venipak Locker LV
1.89 €
{{selectedOffer.parcelStationDeliveryString}}
You saving {{productBundleYouSave | formatAmount}}
The Art-Pol 24 x 450 mm SDS-plus drill bit is designed for rotary and hammer drilling in masonry, concrete and natural stone. With a 24 mm diameter and a total length of 450 mm, this SDS-plus bit fits compatible rotary hammers offering a secure shank connection and efficient impact transfer. It is intended for drilling through-holes, preparing anchor points and installing anchor bolts where a longer reach and stable performance are required.
The SDS-plus shank ensures quick insertion and reliable retention in SDS-plus chucks, reducing wobble during drilling. The 450 mm length provides extended reach for deep holes and drilling through thick walls or structural elements. The 24 mm diameter produces a clearance size suitable for common anchors and bolts. The bit is optimized for percussion drilling modes, delivering stable drilling speed and consistent hole geometry in hard materials.
Select an SDS-plus compatible rotary hammer and install the drill bit by inserting the shank into the tool chuck until it locks. Set the tool to hammer or percussion mode when working in concrete, masonry or stone; use rotary-only mode for light drilling where appropriate. Apply steady axial pressure, avoid excessive lateral force, and allow the tool and bit to do the work. Withdraw the bit occasionally to clear debris and prevent binding when drilling deep holes.
Use appropriate personal protective equipment including safety glasses, hearing protection and dust mask. For accurate anchor placement, mark and measure hole positions before drilling and use a depth stop or tape on the bit to control hole depth. Maintain the bit by cleaning the flutes after use and replace the bit if signs of wear or chipping appear to ensure consistent drilling performance.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}
