Drill bit Art-Pol ARTPOL SDS Plus 24 x 600 mm

Drill bit Art-Pol ARTPOL SDS Plus 24 x 600 mm is an SDS Plus rotary drill bit designed for use with hammer drills and rotary hammers featuring SDS Plus chucks. With a 24 mm diameter and 600 mm overall length, this bit is intended for drilling into concrete, masonry and other mineral substrates. It provides the reach required for deep-hole drilling tasks such as anchor installation, rebar clearance and through-holes in construction and renovation works.

Advantages

The tool offers a robust carbide tip and flute geometry optimized for efficient chip removal and prolonged cutting performance during impact drilling. The SDS Plus shank ensures secure retention and quick bit changes in compatible rotary hammers, while the 600 mm length permits drilling to depths beyond the reach of standard bits. The 24 mm diameter balances structural clearance for anchors with manageable drilling effort in reinforced and non-reinforced mineral materials.

Suitable for

• Drilling anchor holes in concrete and masonry
• Creating through-holes for pipes and conduits
• Clearing paths around rebar and other embedded elements
• Deep-hole drilling in renovation and structural work

Key specifications

• Shank type: SDS Plus
• Diameter: 24 mm
• Overall length: 600 mm
• Intended material: concrete, masonry and mineral substrates
• Tip material: carbide cutting tip (impact-rated)
• Application: rotary hammer / hammer drill use for impact drilling

How to use

Fit the Art-Pol ARTPOL SDS Plus 24 x 600 mm bit into an SDS Plus-compatible hammer drill or rotary hammer, ensuring the shank locks into the chuck. Select the hammer drilling mode and start drilling at low speed to position the bit, then increase to the required speed and apply steady pressure without forcing. Withdraw the bit periodically to remove dust and debris for effective chip evacuation and to reduce overheating. For through-holes, verify alignment before drilling the full depth.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and dust mask when drilling. Match drill speed and hammer settings to the material and bit size, and inspect the bit for wear or damage before use. When encountering reinforcement, use controlled pressure and consider a smaller pilot hole or alternate methods to avoid sudden binding.