Art-Pol SDS+ 32 mm (model 48432) is a rotary hammer drill bit designed for use with SDS+ chucks. With a 32 mm diameter and a geometry suited for concrete and masonry, the bit is intended for creating larger holes for anchors, sleeves, cable and pipe passages. Its SDS+ shank enables quick, secure insertion and removal in compatible rotary hammers, making it suitable for construction, installation and repair tasks that require robust drilling performance in mineral substrates.
Advantages
The SDS+ 32 mm drill bit provides stable drilling in concrete and masonry due to its diameter and carbide tip geometry. The SDS+ shank design ensures fast, tool-free tool changes and reliable locking in rotary hammers with SDS+ chucks. The bit is optimised for producing clean, accurately sized holes for anchors and through-holes for utilities, reducing the need for rework and enabling consistent drilling depth and alignment.
Suitable for
- Drilling anchor and sleeve holes in concrete and solid masonry
- Creating passages for electrical cables and plumbing pipes
- Installation and repair work in construction and building maintenance
- Tasks requiring larger diameter holes with rotary hammers equipped with SDS+ chucks
Key specifications
- Diameter: 32 mm
- Shank type: SDS+ compatible
- Intended materials: concrete, masonry, mineral substrates
- Application: rotary hammer drilling for anchors, through-holes and service entries
How to use
Install the drill bit into the SDS+ chuck of a compatible rotary hammer until it locks in place. Select the hammer-drill mode appropriate for concrete and apply steady axial pressure while maintaining the drill at a right angle to the surface. Start at low speed to establish the hole, then increase power as needed while allowing the tool to remove debris. Periodically withdraw the bit to clear dust and prevent binding. After drilling, clean the hole of dust before inserting anchors or passing cables and pipes.
Usage recommendations
Use appropriate personal protective equipment including eye protection, hearing protection and dust mask. For prolonged drilling in reinforced concrete, use intermittent operation to reduce heat build-up. Match drill length and hammer power to the hole depth and substrate hardness, and ensure your rotary hammer supports SDS+ accessories.
