Drill Bit Art-Pol SDS Plus 24×1000 mm

Art-Pol SDS Plus 24×1000 mm is an SDS Plus drill bit designed for rotary and hammer drills with SDS Plus chucks. With a 24 mm diameter and a 1000 mm overall length, this long-reach masonry bit is intended for drilling deep holes in concrete, reinforced concrete, brick and natural stone. The SDS Plus shank provides secure tool engagement and efficient transfer of impact energy, while the flute geometry supports removal of dust and debris during extended drilling operations.

Advantages

The drill bit combines a long working length with a standard SDS Plus connection to enable deep anchoring and through-drilling without adapters. Its flute design promotes consistent chip evacuation to reduce jamming and improve drilling speed in dense materials. The standardised shank ensures stable seating in compatible chucks and simplifies bit changes during continuous work.

Suitable for

• Drilling deep anchor holes in concrete and reinforced concrete
• Making through-holes in masonry and brick for services and conduits
• Creating long holes in natural stone where a long-reach bit is required
• Use with SDS Plus rotary-hammer drills for construction and renovation tasks

Key specifications

• Diameter: 24 mm
• Overall length: 1000 mm
• Shank type: SDS Plus
• Intended materials: concrete, reinforced concrete, brick, natural stone
• Flute design: for chip and dust evacuation during long-reach drilling

How to use

Install the SDS Plus shank fully into the compatible drill chuck until it locks. Select an appropriate drilling speed and use hammer function when working in concrete or masonry to improve penetration. Apply steady axial pressure without forcing the bit; allow the drill and impact action to do the work. Periodically withdraw the bit to clear accumulated dust and chips from the hole and flutes, especially when drilling deep holes, and monitor bit wear to maintain effective cutting performance.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, hearing protection and dust mask. When drilling deep holes, consider cooling breaks and periodic extraction of dust or use water only if the drill and work environment allow wet drilling. Match drill speed and hammer frequency to the material; reduce speed for reinforced concrete and stone with harder inclusions.