Drill bit Art-Pol 10 mm spiral (model 54360) for general drilling

Spiral drill bit Art-Pol 10 mm (model 54360) is a general-purpose cutting tool designed for making clean, straight 10 mm holes in a range of common materials. The 10 mm diameter combined with a spiral flute profile promotes efficient chip evacuation and stable penetration, making this drill bit suitable for use with hand drills and drill presses in construction, repair and DIY applications.

Advantages

The spiral geometry ensures reliable chip removal and reduces jamming during continuous drilling. A standard 10 mm diameter provides compatibility with commonly used hole sizes and fasteners. The bit is suitable for a variety of materials including wood, plastics and soft metals, offering versatility for mixed tasks. Its general-purpose design makes it a practical option for both occasional home use and repetitive jobsite operations.

Suitable for

• Drilling through wood for furniture assembly and carpentry
• Creating holes in plastic components and housings
• Light drilling in soft metals such as aluminium and brass
• Use with handheld electric drills and drill presses

Key specifications

• Diameter: 10 mm
• Geometry: spiral flute for chip evacuation
• Intended materials: wood, plastics, soft metals
• Compatibility: suitable for hand drills and drill presses
• Application: general-purpose drilling, construction and DIY

How to use

Secure the drill bit in the chuck of a hand drill or drill press, ensuring it is centered and tightened. Mark the drilling point and, where appropriate, use a pilot mark or centre punch to prevent wandering. Start drilling at low speed to establish the hole, then increase speed as the bit engages the material. Apply steady, even pressure without forcing; allow the spiral flute to evacuate chips. For deeper holes, periodically withdraw the bit to clear debris and reduce heat buildup.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and hearing protection. When drilling metals, apply cutting lubricant or reduced speed to extend bit life. For accurate results in thin or brittle materials, consider backing the workpiece or using a drill press for controlled feed and alignment.