Thread Tap Art-Pol M16 x 1.50 mm, metric hand tap, 1 piece

Art-Pol thread tap M16 x 1.50 mm is a single-piece metric hand tap designed for cutting or repairing internal M16 threads with a 1.50 mm pitch. Supplied as one unit, this hand tap is intended for manual tapping operations in compatible materials where a standard M16 internal thread is required. The tool is suitable for workshop use and maintenance tasks that require reliable, dimensional accuracy for fastening applications.

Advantages

The metric hand tap provides precise thread geometry for consistent fit with M16 bolts and screws. Being a single-piece tool simplifies handling and reduces the risk of component mismatch. Its design supports manual control during tapping, making it appropriate for repair work and small-batch production. The tool’s metric specification ensures compatibility with standard M16 fasteners across mechanical and maintenance tasks.

Suitable for

• Cutting new M16 internal threads in metal, plastic or similar materials (when appropriate speed and lubrication are used)
• Repairing damaged or worn M16 threads in components and assemblies
• Workshop maintenance and on-site mechanical repairs that require M16 metric threads
• Prototyping and small-batch manual production involving M16 fasteners

Key specifications

• Thread size: M16
• Pitch: 1.50 mm
• Tool type: single-piece metric hand tap
• Quantity: 1 piece
• Intended use: cutting or repairing internal threads

How to use

Select the correct drill size for the M16 x 1.50 mm tap according to standard tap drill charts and prepare the workpiece by securing it firmly. Apply suitable cutting fluid or lubricant to the hole and the tap to reduce friction and improve chip evacuation. Start the tap by hand to ensure correct alignment, then advance using a tap wrench with steady, even turns. Back the tap out periodically to clear chips and prevent jamming. After completing the thread, clean the hole and inspect the thread fit with the mating fastener.

Usage recommendations

Use appropriate lubrication and the recommended pilot drill size for the material being tapped. For hard materials, proceed cautiously with frequent chip clearance; for softer materials, control feed to avoid oversized threads. Store the tap in a dry place to prevent corrosion and inspect cutting edges before use to ensure clean, undamaged threads.