Thread Tap Set Art-Pol M22 x 1.50 mm, 2 pieces

Art-Pol thread tap set M22 x 1.50 mm consists of two taps engineered for cutting and repairing internal metric threads with a nominal diameter of 22 mm and a 1.50 mm pitch. The set is intended for use in workshops and maintenance environments where reliable M22x1.50 threaded holes are required in metal and other compatible materials. The taps are suitable for creating new threads or restoring damaged threads in mechanical assemblies and plumbing fittings.

Advantages

The two-piece set offers a complete approach to thread cutting and repair by providing sequential taps to form clean, accurate threads. Hardened cutting edges and a consistent thread profile ensure repeatable results and reduced risk of cross-threading. The compact set is easy to store and transport, and it is compatible with standard tap handles and holders used in workshop operations.

Suitable for

• Cutting new M22 x 1.50 internal threads in metal components
• Repairing or restoring damaged M22x1.50 threads in mechanical assemblies
• Threading holes for plumbing fittings and fixtures that require M22x1.50
• Maintenance and workshop tasks on steel, cast iron, and some non-ferrous materials

Key specifications

• Thread size: M22
• Thread pitch: 1.50 mm
• Set composition: 2 taps for progressive cutting
• Application: internal metric threads (M22 x 1.50)
• Material compatibility: suitable for metals and compatible engineering materials

How to use

Secure the workpiece and center-drill or pilot the hole to the recommended core diameter for M22 x 1.50 before tapping. Fit the first tap into an appropriate tap wrench and apply steady, even pressure while turning clockwise to cut the thread, reversing periodically to break chips. Use the second tap to finish the thread and ensure full profile and fit. Apply suitable cutting fluid during operation to extend tool life and improve thread quality. After tapping, clean the threaded hole of chips and debris before assembly.

Usage recommendations

For best results, match the pilot hole diameter to standard recommendations for M22 x 1.50 threads and use cutting lubricant when tapping metals. Start taps square to the workpiece and use progressive taps in the set in sequence to reduce cutting forces and risk of damage.