Drill bit Art-Pol AR48008 SDS+ 8 mm for concrete

Drill bit Art-Pol AR48008 SDS+ 8 mm is a rotary-hammer bit engineered for drilling clean, single-diameter holes in concrete and masonry. Designed for use with SDS+ rotary hammers, this 8 mm bit delivers reliable centering and efficient chip evacuation to create anchor and dowel holes or through-holes in solid and reinforced concrete. The tool is intended for professional tradespeople and DIY users who need a compact, accurate bit for repetitive concrete drilling tasks.

Advantages

The SDS+ shank ensures fast, secure fitting and reduces slippage during heavy-duty rotary hammer operation. The 8 mm single-diameter tip maintains stable centering for precise hole placement, while the flute geometry promotes quick removal of debris to keep drilling speed consistent. The bit’s construction offers wear resistance suitable for regular use in masonry environments without excess vibration or wandering.

Suitable for

• Drilling anchor and dowel holes in solid and lightweight concrete
• Making through-holes for cable runs or conduits in masonry
• Compact, precise drilling tasks in renovation and construction work
• Professional and DIY applications with SDS+ rotary hammers

Key specifications

• Drill diameter: 8 mm
• Shank type: SDS+
• Intended material: concrete and masonry
• Tip style: single-diameter for precise anchoring holes
• Flute design: for efficient chip removal

How to use

Secure the drill bit into the SDS+ chuck of the rotary hammer until it locks. Mark the drilling point on the concrete, start drilling at low speed to create an initial guide, then apply steady pressure while allowing the tool’s percussion action to do the work. Periodically withdraw the bit to clear accumulated dust and chips, especially for deeper holes, and finish the hole to the required depth for anchors or through-passes.

Usage recommendations

Use appropriate personal protective equipment, including eye protection, hearing protection and a dust mask. For reinforced concrete, verify reinforcement location before drilling and choose the correct drilling mode on the rotary hammer. Replace the bit when wear affects drilling accuracy or speed.