Drill Bit Art-Pol AR48114 SDS+ 14 mm

The Art-Pol AR48114 SDS+ 14 mm drill bit is designed for rotary and hammer drilling in concrete, masonry and natural stone. It fits SDS+ chucks and is intended to create clean, accurate holes with percussive action. The 14 mm diameter and robust shank provide compatibility with a wide range of SDS+ rotary hammers and combi drills used in construction and renovation tasks.

Advantages

This SDS+ drill bit offers a carbide tip shaped for effective impact drilling and improved centring. Its solid shank and compatible SDS+ fitting ensure secure retention during high-torque applications. The 14 mm diameter balances hole size and material removal rate for typical anchoring and dowelling operations, while the optimized flute geometry supports efficient dust evacuation for cleaner holes and longer tool life.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Installing electrical boxes and conduit in block or brick walls
• Preparing fixation points for fixtures and fittings on stone surfaces
• General renovation and construction where percussive drilling is required

Key specifications

• Shank type: SDS+ compatible
• Diameter: 14 mm
• Intended materials: concrete, masonry, natural stone
• Tip material: carbide cutting tip
• Application: rotary and hammer drilling (percussive)

How to use

Insert the drill bit into an SDS+ chuck until it locks securely. Select the hammer or rotary-hammer mode on the drill according to the material hardness and the required drilling speed. Start drilling at low speed to establish a centre point, then increase pressure and speed as appropriate, maintaining steady force without excessive axial load. Periodically withdraw the bit to clear dust from the hole and to prevent overheating. Use appropriate personal protective equipment, including eye protection and respiratory mask, when drilling into dusty materials.

Usage recommendations

Use the 14 mm SDS+ bit with a drill matched in power to the material; for deep or continuous drilling, allow cooling pauses and clear debris frequently to preserve bit life and hole accuracy.