Drill bit Art-Pol AR48214 SDS+ 14 mm for concrete

The Art-Pol AR48214 SDS+ 14 mm drill bit for concrete is engineered for percussive drilling in concrete, masonry and other mineral materials. Designed for use with SDS+ rotary hammer drills, this 14 mm diameter bit ensures stable shank engagement and efficient energy transfer from the tool to the cutting head. It is intended for drilling anchor holes, installing dowels and fixing fasteners where precise and reliable concrete penetration is required.

Advantages

This SDS+ 14 mm drill bit features a robust carbide tip and an optimised flute geometry to evacuate dust effectively during drilling. The SDS+ shank design provides secure locking in compatible hammer drills and reduces slippage under load. The hardened steel body resists bending and wear during repeated impact drilling, delivering consistent hole diameters and longer service life compared with standard twist bits when used in concrete and masonry.

Suitable for

• Drilling anchor and dowel holes in concrete and aerated concrete
• Installing wall plugs and mechanical fasteners in masonry
• Renovation and construction tasks requiring percussive drilling
• Creating pilot holes for anchors in brick and stone

Key specifications

• Diameter: 14 mm
• Shank type: SDS+ compatible
• Tip material: carbide cutting tip
• Body material: hardened steel
• Use: percussive drilling in concrete and masonry

How to use

Fit the SDS+ shank securely into a compatible rotary hammer drill according to the tool manufacturer's instructions. Mark the drilling point, start on low speed to position the bit, then apply steady forward pressure while operating the hammer function for percussive drilling in concrete. Periodically withdraw the bit to clear dust and prevent clogging; for deep holes, remove debris more frequently. Use appropriate personal protective equipment, including safety glasses, hearing protection and dust mask when drilling.

Usage recommendations

For best results, match drill speed and hammer settings to material hardness: higher hammer action for solid concrete, lower settings for softer masonry. Replace the bit when cutting performance declines or the carbide tip shows visible wear. Use dust extraction or well-ventilated conditions when possible to reduce airborne particles.