Drill Bit Art-Pol SDS+ 8 mm AR48308 for concrete

Art-Pol SDS+ 8 mm AR48308 is a masonry drill bit designed for drilling into concrete and other similar masonry materials. Compatible with SDS+ rotary hammer systems, this 8 mm diameter bit is intended for creating anchor holes, dowel fixings and through-holes. The bit's geometry and material choice are aimed at efficient penetration and stable drilling performance when used in hammer drilling mode.

Advantages

The SDS+ shank ensures quick and secure mounting in compatible rotary hammers, reducing slippage during heavy-duty hammering. The 8 mm diameter offers a balance between small-diameter accuracy and sufficient hole size for common anchors and dowels. The cutting tip and flute design help evacuate dust and chips from the hole, supporting steady drilling progress and consistent hole quality.

Suitable for

• Drilling anchor holes in concrete for fixings and dowels
• Through-holes and pass-through drilling in masonry
• Light to medium professional tasks and DIY projects with SDS+ rotary hammers

Key specifications

• Drill type: SDS+ masonry bit
• Nominal diameter: 8 mm
• Intended material: concrete and similar masonry
• Shank system: SDS+ for rotary hammers

How to use

Fit the bit into an SDS+ compatible rotary hammer, ensure it locks securely, and select the hammer drilling mode on the tool. Mark the drilling point, start at low speed to position the bit, then apply steady pressure while drilling. Use intermittent withdrawal to clear dust when drilling deeper holes. Maintain firm, controlled force and avoid excessive axial load which can damage the bit or the tool.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, dust mask and hearing protection. Match drilling speed and applied pressure to the concrete condition and hole depth; for reinforced concrete, confirm absence of rebar or use appropriate rebar-detecting tools before drilling. Store the bit dry and protected from impact to preserve tip geometry.