Drill Bit Art-Pol SDS+ 10 mm AR48360 for Concrete

The Art-Pol SDS+ 10 mm drill bit AR48360 is a solid masonry bit designed for drilling anchor and dowel holes in concrete and other masonry materials. Compatible with SDS+ rotary hammers, this 10 mm diameter bit provides a consistent hole size for reliable fixing installation. The bit is intended for both professional and DIY use where stable penetration and precise hole diameter are required.

Advantages

The SDS+ shank ensures secure retention in compatible rotary hammers and fast bit changes without additional tools. The solid construction and carbide tip deliver stable drilling performance and resistance to wear when used in concrete and reinforced concrete. The 10 mm diameter provides a standard size for many anchors and dowels, enabling repeatable results and straightforward installation. The bit’s length and balance are designed to maintain straight drilling and reduce wobble.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Installation of mechanical and chemical anchors
• General-purpose drilling in reinforced concrete for fixtures and fittings
• Professional construction and renovation tasks, as well as home improvement projects

Key specifications

• Cutting diameter: 10 mm
• Shank type: SDS+ compatible
• Intended material: concrete and masonry (including reinforced concrete)
• Tip material: carbide cutting tip for improved wear resistance
• Design: solid masonry drill bit for anchor/dowel holes

How to use

Fit the bit securely into an SDS+ rotary hammer according to the tool manufacturer's instructions. Mark the drilling point and set the hammer to the appropriate drilling mode for concrete. Start drilling with light pressure to establish the hole, then apply steady, even pressure while allowing the hammer action to do the work. Withdraw the bit occasionally to clear dust from the hole and maintain efficient cutting. After reaching the required depth, clean the hole of debris before inserting anchors or dowels.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and dust mask. For reinforced concrete, use intermittent withdrawal to clear chips and prevent overheating. Match anchor and dowel sizes to the 10 mm hole diameter and verify required drilling depth for the chosen fixings.