Drill bit Art-Pol SDS+ 12 mm AR48412 for concrete

The Art-Pol SDS+ 12 mm drill bit AR48412 is designed for drilling clean, accurate holes in concrete and masonry. Made for use with SDS+ rotary hammers, this 12 mm diameter bit is suitable for creating anchor holes, dowel placements and through-holes in reinforced concrete and brick. The bit's geometry supports efficient dust removal and steady progress during rotary hammer drilling operations.

Advantages

This SDS+ 12 mm drill bit delivers consistent hole dimension and reliable centring when used with compatible rotary hammers. Its tip and flute design help evacuate debris and reduce binding in deep holes, while the hardened construction preserves cutting edges during repetitive work. The shank format ensures secure retention in SDS+ chucks for uninterrupted drilling performance.

Suitable for

• Drilling anchor and dowel holes in concrete and reinforced concrete
• Creating passage holes through brick and masonry
• Professional construction, installation and renovation tasks
• DIY projects involving concrete fixtures and fastenings

Key specifications

• Diameter: 12 mm
• Shank type: SDS+ compatible
• Intended material: concrete, reinforced concrete, masonry
• Typical use: rotary hammer drilling (hammer and rotation)
• Design features: fluted body for dust removal, reinforced tip geometry

How to use

Insert the SDS+ shank fully into the rotary hammer chuck until it locks. Select hammer-drilling mode and start at low speed to position the tip, then increase power as required to advance through the material. Apply steady axial pressure without forcing the bit; allow the tool's hammer action to do the work. Periodically withdraw the bit to clear accumulated debris and reduce heat build-up when drilling deep holes.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, ear protection and dust mask when drilling concrete. Match the drill bit diameter to anchor or dowel specifications and select the correct drilling depth. For reinforced concrete, use controlled technique to avoid excessive bit wear and check for embedded rebar before drilling.